Hi Hongbin, Yes the version of kuryr-lib is :0.8.0 , So I think I should remove it ! I should remove only the kuryr-lib ! if you have some command they can help me to unisntall it , it will be nice to provide it .
Best Regards, Rania Le mer. 21 nov. 2018 à 02:27, Hongbin Lu <hongbin...@gmail.com> a écrit : > Hi Rania, > > The config option 'driver' was recently renamed, so I guess the problem is > the version of kuryr-lib is not right. The Pike release of Zun is matched > to kuryr-lib 0.6.0 so you might want to confirm the version of kuryr-lib. > > $ sudo pip freeze | grep kuryr > > If the version is not right, uninstall and re-install the kuryr-lib, then > restart kuryr-libnetwork. Let me know if it still doesn't work. > > Best regards, > Hongbin > > On Tue, Nov 20, 2018 at 8:01 PM Rania Adouni <raniaado...@gmail.com> > wrote: > >> hi , >> Thanks for your reply and yes the problem that kuryr-libnetwork is >> failed to start with the error : >> ● kuryr-libnetwork.service - Kuryr-libnetwork - Docker network plugin for >> Neutron >> Loaded: loaded (/etc/systemd/system/kuryr-libnetwork.service; enabled; >> vendor preset: enabled) >> Active: failed (Result: exit-code) since mer. 2018-11-21 01:48:48 CET; >> 287ms ago >> Process: 13974 ExecStart=/usr/local/bin/kuryr-server --config-file >> /etc/kuryr/kuryr.conf (code=exited, status=1/FAILURE) >> Main PID: 13974 (code=exited, status=1/FAILURE) >> >> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542 >> 13974 ERROR kuryr value = self._do_get(name, group, namespace) >> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542 >> 13974 ERROR kuryr File >> "/usr/lib/python2.7/dist-packages/oslo_config/cfg.py", line 2942, in _ >> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542 >> 13974 ERROR kuryr info = self._get_opt_info(name, group) >> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542 >> 13974 ERROR kuryr File >> "/usr/lib/python2.7/dist-packages/oslo_config/cfg.py", line 3099, in _ >> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542 >> 13974 ERROR kuryr raise NoSuchOptError(opt_name, group) >> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542 >> 13974 ERROR kuryr NoSuchOptError: no such option driver in group [binding] >> nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542 >> 13974 ERROR kuryr >> nov. 21 01:48:48 compute systemd[1]: kuryr-libnetwork.service: Main >> process exited, code=exited, status=1/FAILURE >> nov. 21 01:48:48 compute systemd[1]: kuryr-libnetwork.service: Unit >> entered failed state. >> nov. 21 01:48:48 compute systemd[1]: kuryr-libnetwork.service: Failed >> with result 'exit-code'. >> >> >> and also the command lsof -iTCP -sTCP:LISTEN -P doesn't show the kuryr >> service : >> COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME >> dockerd 1144 root 5u IPv4 20120 0t0 TCP compute:2375 >> (LISTEN) >> sshd 1288 root 3u IPv4 19532 0t0 TCP *:22 (LISTEN) >> sshd 1288 root 4u IPv6 19534 0t0 TCP *:22 (LISTEN) >> dnsmasq 1961 nobody 6u IPv4 23450 0t0 TCP >> 192.168.122.1:53 (LISTEN) >> sshd 4163 adouni 9u IPv6 34950 0t0 TCP >> localhost:6010 (LISTEN) >> sshd 4163 adouni 10u IPv4 34951 0t0 TCP >> localhost:6010 (LISTEN) >> qemu-syst 4621 libvirt-qemu 18u IPv4 37121 0t0 TCP *:5900 >> (LISTEN) >> >> !!! >> >> >> Le mer. 21 nov. 2018 à 01:45, Jacob Burckhardt < >> jburckha...@pdvwireless.com> a écrit : >> >>> Your error message says it cannot connect to port 23750. That's the >>> kuryr-libnetwork default listen port. On 192.168.1.10, run: >>> >>> >>> >>> lsof -iTCP -sTCP:LISTEN -P >>> >>> >>> >>> On my compute node, it outputs: >>> >>> >>> >>> COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME >>> >>> … >>> >>> kuryr-ser 1976 root 6u IPv4 30896 0t0 TCP >>> localhost:23750 (LISTEN) >>> >>> >>> >>> So, you can see that kuryr is listening on 23750. If lsof does not list >>> a process listening on 23750, then check if kuryr is up by running: >>> >>> >>> >>> systemctl status kuryr-libnetwork >>> >>> >>> >>> You can also try restarting it by running: >>> >>> >>> >>> systemctl restart kuryr-libnetwork >>> >>> >>> >>> I installed that service by following: >>> >>> >>> >>> >>> https://docs.openstack.org/kuryr-libnetwork/queens/install/compute-install-ubuntu.html >>> >>> >>> >>> That is the queens install guide which might help you since zun has no >>> install guide in pike. >>> >>> >>> >>> If you see it listening, you can try this command: >>> >>> >>> >>> telnet 192.168.1.10 23750 >>> >>> >>> >>> If it fails to connect, then try: >>> >>> >>> >>> telnet localhost 23750 >>> >>> >>> >>> If it works with localhost but not 192.168.1.10, then I think that means >>> you need to tell docker to connect to localhost instead of 192.168.1.10. >>> >>> >>> >>> Can you get the commands at the following web page to succeed? >>> >>> >>> >>> https://docs.openstack.org/kuryr-libnetwork/queens/install/verify.html >>> >>> >>> >>> *Jacob Burckhardt* >>> >>> Senior Software Engineer >>> >>> [image: pdvWireless] >>> >>> >>> >>> *From:* Rania Adouni <raniaado...@gmail.com> >>> *Sent:* Tuesday, November 20, 2018 2:02 PM >>> *To:* openstack-dev@lists.openstack.org >>> *Subject:* [openstack-dev] [zun] Failed to create Container >>> >>> >>> >>> >>> >>> Hi , >>> >>> >>> >>> I am starting to use zun on openstack pike , and when I try to lunch >>> container with cirros image , I get this reason : Docker internal >>> error: 500 Server Error: Internal Server Error ("legacy plugin: Post >>> http://192.168.1.10:23750/Plugin.Activate: dial tcp 192.168.1.10:23750: >>> connect: connection refused"). >>> >>> you can find here the log on my compute node : >>> https://pastebin.com/nZTiTZiV. >>> >>> some help with this will be great . >>> >>> Best Regards, >>> >>> Rania Adouni >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> __________________________________________________________________________ >>> OpenStack Development Mailing List (not for usage questions) >>> Unsubscribe: >>> openstack-dev-requ...@lists.openstack.org?subject:unsubscribe >>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev >>> >> __________________________________________________________________________ >> OpenStack Development Mailing List (not for usage questions) >> Unsubscribe: >> openstack-dev-requ...@lists.openstack.org?subject:unsubscribe >> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev >> > __________________________________________________________________________ > OpenStack Development Mailing List (not for usage questions) > Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev >
__________________________________________________________________________ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
