Hi Amy, First, I want to confirm which version of devstack you were using? (go to the devstack folder and type "git log -1").
If possible, I would suggest to do the following steps: * Run ./unstack * Run ./clean * Pull down the latest version of devstack (if it is too old) * Pull down the latest version of all the projects under /opt/stack/ * Run ./stack If above steps couldn't resolve the problem, please let me know. Best regards, Hongbin On Fri, Jul 13, 2018 at 10:33 AM Amy Marrich <a...@demarco.com> wrote: > Hongbin, > > Let me know if you still want me to mail the dev list, but here are the > gists for the installations and the broken CLI I mentioned > > local.conf - which is basically the developer quickstart instructions for > Zun > > https://gist.github.com/spotz/69c5cfa958b233b4c3d232bbfcc451ea > > > This is the failure with a fresh devstack installation > > https://gist.github.com/spotz/14e19b8a3e0b68b7db2f96bff7fdf4a8 > > > Requirements repo change a few weeks ago > > > http://git.openstack.org/cgit/openstack/requirements/commit/?id=cb6c00c01f82537a38bd0c5a560183735cefe2f9 > > > Changed local Flask version for curry-libnetwork and set local.conf to > reclone=no and then installed and tried to use the CLI. > > https://gist.github.com/spotz/b53d729fc72d24b4454ee55519e72c07 > > > It makes sense that Flask would cause an issue on the UI installation even > though it's enabled even for a non-enabled build according to the > quickstart doc. I don't mind doing a patch to fix kuryr-libnetwork to bring > it up to the current requirements. I don't however know where to start > troubleshooting the 401 issue. On a different machine I have decstack with > Zun but no zun-ui and the CLI responds correctly. > > > Thanks, > > Amy (spotz) > > > On Thu, Jul 12, 2018 at 11:21 PM, Hongbin Lu <hongbin...@gmail.com> wrote: > >> Hi Amy, >> >> I am also in doubts about the Flask version issue. Perhaps you can >> provide more details about this issue? Do you see any error message? >> >> Best regards, >> Hongbin >> >> On Thu, Jul 12, 2018 at 10:49 PM Shu M. <shu.mu...@gmail.com> wrote: >> >>> >>> Hi Amy, >>> >>> Thank you for sharing the issues. Zun UI does not require >>> kuryr-libnetwork directly, and keystone seems to have same requirements for >>> Flask. So I wonder why install failure occurred by Zun UI. >>> >>> Could you share your correction for requrements. >>> >>> Unfortunately, I'm in trouble on my development environment since >>> yesterday. So I can not investigate the issues quickly. >>> I added Hongbin to this topic, he would help us. >>> >>> Best regards, >>> Shu Muto >>> >>> 2018年7月13日(金) 9:29 Amy Marrich <a...@demarco.com>: >>> >>>> Hi, >>>> >>>> I was given your email on the #openstack-zun channel as a source for >>>> questions for the UI. I've found a few issues installing the Master branch >>>> on devstack and not sure if they should be bugged. >>>> >>>> kuryr-libnetwork has incorrect versions for Flask in both >>>> lower-constraints.txt and requirements.txt, this only affects installation >>>> when enabling zun-ui, I'll be more then happy to bug and patch it, if >>>> confirmed as an issue. >>>> >>>> Once correcting the requirements locally to complete the devstack >>>> installation, I'm receiving 401s when using both the OpenStack CLI and Zun >>>> client. I'm also unable to create a container within Horizon. The same >>>> credentials work fine for other OpenStack commands. >>>> >>>> On another server without the ui enabled I can use both the CLI and >>>> client no issues. I'm not sure if there's something missing on >>>> https://docs.openstack.org/zun/latest/contributor/quickstart.html or >>>> some other underlying issue. >>>> >>>> Any help or thoughts appreciated! >>>> >>>> Thanks, >>>> >>>> Amy (spotz) >>>> >>>> >
__________________________________________________________________________ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
