I'm building against libc6 (glibc 2.9) and kernel 3.2.6. Are you
skipping the 'make depend' step? My build script does, './Configure
<args>', 'make depend', 'make'.
Jay
On 2/18/2015 8:03 AM, Mike Collins wrote:
Thanks for the suggestions Jay but am still not having much luck.
Does 1.0.1 have any minimum requirements for the libc version or
kernel version? I am currently building against libc version 2.5 with
the kernel at 2.6.30.
Mike
---------- Forwarded message ----------
From: Jay Foster <jayf0s...@roadrunner.com
<mailto:jayf0s...@roadrunner.com>>
To: openssl-users@openssl.org <mailto:openssl-users@openssl.org>
Cc:
Date: Fri, 13 Feb 2015 08:48:12 -0800
Subject: Re: [openssl-users] 1.0.1 upgrade issue
I have successfully built OpenSSL 1.0.0..., 1.0.1..., and 1.0.2 also
on an ARM926EJ linux based system. I used the 'no-ssl2 no-ssl3
linux-armv4 shared' options (plus some others). I found that it works
with and without the ARM assembly accelerations (no-asm option), even
though the ARM926EJ is an arm5te. It works fine with lighttpd and
passes the OpenSSL tests. I assume you are also using the appropriate
'--cross-compile-prefix=<prefix>' option. You might try adding
"-mlittle-endian -mcpu=arm926ej-s -DL_ENDIAN" to the CFLAGS, although
that should be redundant (the compiler should already know this).
Also, make sure there are no '-nostdinc' (or similar) type compiler
options creeping in. These change the search order of header files,
which can cause OpenSSL to be built against the (old) headers in your
tool chain, rather than it's local (current) headers.
I did discover that with 1.0.2, I also needed to add
'-DOPENSSL_USE_BUILD_DATE' to the CFLAGS to get the 'openssl version
-a' command to report a useful build date.
Jay
On 2/13/2015 7:29 AM, Mike Collins wrote:
I am upgrading an embedded linux board's BSP from 1.0.0m to 1.0.1l due
to a requirement for TLS v1.1. Version 1.0.1 will cross compile
without errors using my 1.0.0 configuration but I have identified the
following errors on the board (so far) with the build using 1.0.1:
1.) Cannot create a RSA key
2.) Trying to connect to the board's Lighttpd web server via https
will timeout with PKCS #11 error
3.) Curl https POST calls fail with RSA padding error.
Board has a ARM926EJ based processor and I am using a Codesourcery
Lite toolchain. Configure settings (besides --prefix, etc) are shared,
no-asm, linux-generic32, no-ssl2. All the other packages on the board
have been rebuilt against the new openssl version.
I am looking at the key creation first since that may be causing the
other issues. If I try to create a key from the board command line
using "openssl genrsa -out testkey.pem 2048" I get a response of
"Generating RSA private key, 2048 bit long modulus". At this point it
seems to get stuck in a loop; I am seeing the progress indicators
(".") but it will never finish creating the key. I have let it run
10-15 minutes without completion; it just keeps displaying successive
progress indicators. I can do Ctrl-C and it will exit.
I don't think so but are there any dependency changes from 1.0.0 to 1.0.1?
I noticed 1.0.2 has been released so tried that as well but have the
same result as 1.0.1
Mike
_______________________________________________
openssl-users mailing list
To unsubscribe: https://mta.openssl.org/mailman/listinfo/openssl-users
_______________________________________________
openssl-users mailing list
To unsubscribe: https://mta.openssl.org/mailman/listinfo/openssl-users
