$ uname -a
SunOS virtualbox-sxce 5.11 snv_129 i86pc i386 i86pc
$ cfgadm -l
Ap_Id Type Receptacle Occupant Condition
sata0/0::dsk/c1t0d0 disk connected configured ok
sata0/1::dsk/c1t1d0 disk connected configured ok
sata0/2::dsk/c1t2d0 disk connected configured ok
Or you can probably dig it out of prtpicl -v output, but that has so much
other stuff in it that I doubt you'd want to.
I attached the part of the prtpicl -v output for me (running SXCE snv_129
under VirtualBox with three emulated SATA drives) starting with
the controller and including the drives. If you look at the target for
those, that seems to match up to the SATA port I'd assigned.
(only the first is in use right now; the other two were older images
that I'd attached to let me dig some old stuff out that I still wanted)
If you looked for something sort of similar (it's a tree, with each deeper
level indented further), you might find what you're after.
--
This message posted from opensolaris.org
pci8086,2829 (obp-device, f0000001ec)
:DeviceID 0xd
:UnitAddress 0
:device-id 0x2829
:vendor-id 0x8086
:revision-id 0x2
:class-code 0x10601
:unit-address d
:min-grant 0
:max-latency 0
:interrupts 0x1
:devsel-speed 0
:power-consumption 01 00 00 00 01 00 00 00
:model SATA AHCI 1.0 Interface
:compatible (f000000200TBL)
| pci8086,2829.2 |
| pci8086,2829 |
| pciclass,010601 |
| pciclass,0106 |
:reg
00 68 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10 68 00 01 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 00
14 68 00 01 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00 00
18 68 00 01 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 00
1c 68 00 01 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00 00
20 68 00 01 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00
24 68 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00
:assigned-addresses
10 68 00 81 00 00 00 00 40 d2 00 00 00 00 00 00 08 00 00 00
14 68 00 81 00 00 00 00 48 d2 00 00 00 00 00 00 02 00 00 00
18 68 00 81 00 00 00 00 50 d2 00 00 00 00 00 00 08 00 00 00
1c 68 00 81 00 00 00 00 58 d2 00 00 00 00 00 00 02 00 00 00
20 68 00 81 00 00 00 00 60 d2 00 00 00 00 00 00 10 00 00 00
24 68 00 82 00 00 00 00 00 40 80 f0 00 00 00 00 00 20 00 00
:scsi-enumeration 0
:scsi-options 0x107ff8
:scsi-reset-delay 0xbb8
:scsi-watchdog-tick 0xa
:scsi-selection-timeout 0xfa
:scsi-tag-age-limit 0x2
:initiator-interconnect-type SPI
:scsi-binding-set spi
:sata 0x1
:devfs-path /p...@0,0/pci8086,2...@d
:driver-name ahci
:binding-name pciclass,010601
:bus-addr d
:instance 0
:_class obp-device
:name pci8086,2829
disk (block, f000000210)
:device-type scsi
:target 0
:lun 0
:compatible (f00000022cTBL)
| scsiclass,00.vATA.pVBOX_HARDDISK.r1_0 |
| scsiclass,00.vATA.pVBOX_HARDDISK |
| scsiclass,00 |
| scsiclass |
:class scsi
:inquiry-vendor-id VBOX
:inquiry-product-id HARDDISK
:inquiry-revision-id 1.0
:inquiry-device-type 0
:devid
id1,s...@sata_____vbox_harddisk____vb3630b4a7-86611be5
:device-blksize 0x200
:pm-capable 0x30006
:fm-ereport-capable
:ddi-kernel-ioctl
:ddi-failfast-supported
:pm-hardware-state needs-suspend-resume
:pm-components (f00000021bTBL)
| NAME=spindle-motor |
| 0=off |
| 1=on |
:lba-access-ok
:inquiry-serial-no VB3630b4a7-86611be5
:devfs-path /p...@0,0/pci8086,2...@d/d...@0,0
:driver-name sd
:binding-name scsiclass,00
:bus-addr 0,0
:instance 0
:_class block
:name disk
disk (block, f000000234)
:device-type scsi
:target 0x1
:lun 0
:compatible (f000000250TBL)
| scsiclass,00.vATA.pVBOX_HARDDISK.r1_0 |
| scsiclass,00.vATA.pVBOX_HARDDISK |
| scsiclass,00 |
| scsiclass |
:class scsi
:inquiry-vendor-id VBOX
:inquiry-product-id HARDDISK
:inquiry-revision-id 1.0
:inquiry-device-type 0
:devid
id1,s...@sata_____vbox_harddisk____vb86e78567-19ea32c1
:device-blksize 0x200
:pm-capable 0x30006
:fm-ereport-capable
:ddi-kernel-ioctl
:ddi-failfast-supported
:pm-hardware-state needs-suspend-resume
:pm-components (f00000023fTBL)
| NAME=spindle-motor |
| 0=off |
| 1=on |
:lba-access-ok
:inquiry-serial-no VB86e78567-19ea32c1
:devfs-path /p...@0,0/pci8086,2...@d/d...@1,0
:driver-name sd
:binding-name scsiclass,00
:bus-addr 1,0
:instance 2
:_class block
:name disk
disk (block, f000000258)
:device-type scsi
:target 0x2
:lun 0
:compatible (f000000274TBL)
| scsiclass,00.vATA.pVBOX_HARDDISK.r1_0 |
| scsiclass,00.vATA.pVBOX_HARDDISK |
| scsiclass,00 |
| scsiclass |
:class scsi
:inquiry-vendor-id VBOX
:inquiry-product-id HARDDISK
:inquiry-revision-id 1.0
:inquiry-device-type 0
:devid
id1,s...@sata_____vbox_harddisk____vb9088d2f2-000dab9d
:device-blksize 0x200
:pm-capable 0x30006
:fm-ereport-capable
:ddi-kernel-ioctl
:ddi-failfast-supported
:pm-hardware-state needs-suspend-resume
:pm-components (f000000263TBL)
| NAME=spindle-motor |
| 0=off |
| 1=on |
:lba-access-ok
:inquiry-serial-no VB9088d2f2-000dab9d
:devfs-path /p...@0,0/pci8086,2...@d/d...@2,0
:driver-name sd
:binding-name scsiclass,00
:bus-addr 2,0
:instance 3
:_class block
:name disk
_______________________________________________
opensolaris-discuss mailing list
[email protected]
