Hi, Any pointers on this ? Is using Fedora causing this to happen ?
On Thu, Nov 3, 2011 at 5:30 PM, Ramkumar Jayaraman <ramkumarj2000comm...@gmail.com> wrote: > Hi, > > I am trying to get OpenOCD working with a Pandaboard. I m getting > "Warn : Invalid ACK 0x6 in JTAG-DP transaction" followed by the > "Polling target failed, GDB will be halted. Polling again in 6300ms". > > Machine : Fedora Linux > Debugger : Busblaster v2 (v1.3.jtagkey) > > My config files are all standard. > ==== openocd.cfg ==== > source busblaster.cfg > source [find board/ti_pandaboard.cfg] > adapter_khz 2000 > > ==== busblaster.cfg ==== > interface ft2232 > ft2232_device_desc "Dual RS232-HS" > ft2232_layout jtagkey > ft2232_vid_pid 0x0403 0x6010 > > Any thoughts/idea ? > > TIA, > Ram > > > Open On-Chip Debugger 0.6.0-dev-00180-g444f202 (2011-11-02-23:22) > <snip> > Info : JTAG tap: omap4430.jrc tap/device found: 0x3b95c02f (mfg: > 0x017, part: 0xb95c, ver: 0x3) > Info : JTAG tap: omap4430.dap enabled > Polling target failed, GDB will be halted. Polling again in 100ms > Polling target failed, GDB will be halted. Polling again in 300ms > Polling target failed, GDB will be halted. Polling again in 700ms > Info : JTAG tap: omap4430.m30_dap enabled > Info : JTAG tap: omap4430.m31_dap enabled > Warn : Invalid ACK 0x6 in JTAG-DP transaction > Polling target failed, GDB will be halted. Polling again in 1500ms > Polling target failed, GDB will be halted. Polling again in 3100ms > Polling target failed, GDB will be halted. Polling again in 6300ms > Polling target failed, GDB will be halted. Polling again in 6300ms > ^C > _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
