On Fri, Oct 7, 2011 at 2:37 PM, Attila Kinali <att...@kinali.ch> wrote:
> On Thu, 6 Oct 2011 23:07:44 +0200 > Andreas Fritiofson <andreas.fritiof...@gmail.com> wrote: > > > It obviously hangs during init, which could mean just about anything. > It's > > impossible to tell without a debug log (-d3). > > I strippped the script down to what is needed. > And get the following output, using current git master/HEAD: > > ---schnipp--- > # src/openocd -f /tmp/armusbocd.script > Open On-Chip Debugger 0.6.0-dev-00090-gda8ce5f (2011-10-07-14:09) > Licensed under GNU GPL v2 > For bug reports, read > http://openocd.berlios.de/doc/doxygen/bugs.html > Info : only one transport option; autoselect 'jtag' > 15 kHz > trst_only separate trst_push_pull > target created > Flash bank access DONE > Info : clock speed 15 kHz > Info : JTAG tap: sam3n.cpu tap/device found: 0x4ba00477 (mfg: 0x23b, part: > 0xba00, ver: 0x4) > Info : sam3n.cpu: hardware has 6 breakpoints, 4 watchpoints > post init > ---schnapp--- > Well, what's the problem now? It seems to work? Or at least get through init, since "post init" is printed now, which it wasn't before. /Andreas
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
