Hello, appended simple patch adds the definition for the STEVAL-PCC010V2 Board withe the STM32F207. At least the detection works: Info : JTAG tap: stm32f2xxx.cpu tap/device found: 0x4ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x4) Info : JTAG tap: stm32f2xxx.bs tap/device found: 0x06411041 (mfg: 0x020, part: 0x6411, ver: 0x0) Info : stm32f2xxx.cpu: hardware has 6 breakpoints, 4 watchpoints
( this time with the comment corrected + SI unit etc + better file name ) Bye -- Uwe Bonnes b...@elektron.ikp.physik.tu-darmstadt.de Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt --------- Tel. 06151 162516 -------- Fax. 06151 164321 ---------- >From 5349f87821020e00f33037f951afad329ea513b3 Mon Sep 17 00:00:00 2001 From: Uwe Bonnes <b...@elektron.ikp.physik.tu-darmstadt.de> Date: Thu, 1 Sep 2011 17:14:35 +0200 Subject: Add definition for the STEVAL-PCC010 board with the STM32F207 --- tcl/board/steval_pcc010.cfg | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) create mode 100644 tcl/board/steval_pcc010.cfg diff --git a/tcl/board/steval_pcc010.cfg b/tcl/board/steval_pcc010.cfg new file mode 100644 index 0000000..2d63140 --- /dev/null +++ b/tcl/board/steval_pcc010.cfg @@ -0,0 +1,9 @@ +# Use for the STM207VG plug-in board (1 MiB Flash and 112+16 KiB Ram +# comming with the STEVAL-PCC010 board +# http://www.st.com/internet/evalboard/product/251530.jsp +# or any other board with only a STM32F2x in the JTAG chain + +# increase working area to 32KB for faster flash programming +set WORKAREASIZE 0x8000 + +source [find target/stm32f2x.cfg] -- 1.7.3.4 _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
