Hello, appended simple patch adds the definition for the STEVAL-PCC010V2 Board withe the STM32F207. At least the detection works: Info : JTAG tap: stm32f2xxx.cpu tap/device found: 0x4ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x4) Info : JTAG tap: stm32f2xxx.bs tap/device found: 0x06411041 (mfg: 0x020, part: 0x6411, ver: 0x0) Info : stm32f2xxx.cpu: hardware has 6 breakpoints, 4 watchpoints
( this time with the comment corrected) Bye -- Uwe Bonnes b...@elektron.ikp.physik.tu-darmstadt.de Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt --------- Tel. 06151 162516 -------- Fax. 06151 164321 ---------- >From 47d86f45e3efa847640da08f80cbdfd679a01ca6 Mon Sep 17 00:00:00 2001 From: Uwe Bonnes <b...@elektron.ikp.physik.tu-darmstadt.de> Date: Thu, 1 Sep 2011 11:24:29 +0200 Subject: Add definition for the STEVAL-PCC0102V2 board withe the STM32f207 --- tcl/board/steval_pcc0102v2.cfg | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-) create mode 100644 tcl/board/steval_pcc0102v2.cfg diff --git a/tcl/board/steval_pcc0102v2.cfg b/tcl/board/steval_pcc0102v2.cfg new file mode 100644 index 0000000..8767728 --- /dev/null +++ b/tcl/board/steval_pcc0102v2.cfg @@ -0,0 +1,8 @@ +# This is an STEVAL-PCC010V2 eval board with a single STM32F207VG chip. +# with 1 MB Flash and 112+16 kB Ram +# http://www.st.com/internet/evalboard/product/251530.jsp + +# increase working area to 32KB for faster flash programming +set WORKAREASIZE 0x8000 + +source [find target/stm32f2x.cfg] -- 1.7.3.4 _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
