Hi all,
I tried to use AM3517evm's config on AM3517 Craneboard.
But it seems that no luck to get openOCD work.
*sudo openocd -f interface/flyswatter.cfg -f board/am3517evm.cfg
Open On-Chip Debugger 0.5.0 (2011-08-31-15:54)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
10 kHz
trst_only separate trst_push_pull
Info : clock speed 10 kHz
Info : JTAG tap: am35x.jrc tap/device found: 0x0b86802f (mfg: 0x017, part:
0xb868, ver: 0x0)
Warn : JTAG tap: am35x.jrc UNEXPECTED: 0x0b86802f (mfg: 0x017, part:
0xb868, ver: 0x0)
Error: JTAG tap: am35x.jrc expected 1 of 1: 0x0b7ae02f (mfg: 0x017, part:
0xb7ae, ver: 0x0)
Error: Trying to use configured scan chain anyway...
Warn : Bypassing JTAG setup events due to errors
***
I'm curious that anyone try to get openOCD work on craneboard?
Thanks,
--
- Matt
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
