On Tue, Aug 9, 2011 at 2:01 AM, Carlson Gary <gcarl...@carlson-minot.com> wrote: > A while back I vaguely remember seeing something on this forum that the > latest jlink dongles were having some problems running with OpenOCD. Now I > can¹t seem to find the post when I need it the most. I was hoping other > jlink users might be able to quickly jog my memory as to what the issue was > and the resolution ‹ if any. > > I currently have an Atmel SAM-ICE which is basically a restricted jlink with > older firmware. For the most part this has ran fine in OpenOCD. > Unfortunately I have a new project that requires a processor from a > different manufacturer and obviously won¹t work with the SAM-ICE dongles I > current have. Before I buy one of the unrestricted Segger devices I figured > it might be a prudent thing to do a quick investigation first. >
Yes OpenOCD has some problems with the later firmware version of J-Link (V8). You can however downgrade the J-Link firmware to an older version to use OpenOCD. http://marc.info/?l=openocd-development&m=131220636316948&w=2 -- Xiaofan _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
