hi! i'm currently using the merge i made of the bitbang stuff with openocd. i'm using an FT2232H. one of the channels is a UART to a microproccesor. the other channel is set to JTAG (driven by openocd) and the extra pins on that channel (10 pins!) are being used to read status pins and handle a power on/off line to the microprocessor. i've been doing a lot of testing (overnight loops) with this, and the bitbang-openocd part seems to work great (though i still have some problems on my stuff)
nice work! :) On Mon, Jun 20, 2011 at 4:44 PM, Tomek CEDRO <tomek.ce...@gmail.com> wrote: > On Mon, Jun 20, 2011 at 11:33 PM, Rodrigo Rosa <rodrigorosa...@gmail.com> > wrote: >> i found a bug in "interface_signal del", the name of the signal was >> not passed down to the functions thats look for it, so it didn't work. >> attached a patch :) > > Tanks, I will take a look, but signal deletion worked for me.. > >> the first time it doesn't work, but if i annoy it by trying again it >> will cooperate. > > Using JTAG interface also 'init' did not always work when starting > opencd -c noinit. When created simple file with those commands and > passed -f to openocd then 'init' works fine... > > Tanks for support Rodrigo! :-) > > -- > CeDeROM, SQ7MHZ, http://www.tomek.cedro.info > -- Rodrigo. _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
