The default is -Werror, so warnings become errors
and stop the build.
Might be better to simply #define FT_STATUS instead.
Signed-off-by: Steve Bennett <ste...@workware.net.au>
---
src/jtag/drivers/ft2232.c | 88 ++++++++++++++++++++++----------------------
1 files changed, 44 insertions(+), 44 deletions(-)
diff --git a/src/jtag/drivers/ft2232.c b/src/jtag/drivers/ft2232.c
index 2e0495d..59b1606 100644
--- a/src/jtag/drivers/ft2232.c
+++ b/src/jtag/drivers/ft2232.c
@@ -515,7 +515,7 @@ static int ft2232_write(uint8_t* buf, int size, uint32_t*
bytes_written)
if ((status = FT_Write(ftdih, buf, size, &dw_bytes_written)) != FT_OK)
{
*bytes_written = dw_bytes_written;
- LOG_ERROR("FT_Write returned: %lu", status);
+ LOG_ERROR("FT_Write returned: %lu", (unsigned long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
else
@@ -558,7 +558,7 @@ static int ft2232_read(uint8_t* buf, uint32_t size,
uint32_t* bytes_read)
*bytes_read, &dw_bytes_read)) !=
FT_OK)
{
*bytes_read = 0;
- LOG_ERROR("FT_Read returned: %lu", status);
+ LOG_ERROR("FT_Read returned: %lu", (unsigned
long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
*bytes_read += dw_bytes_read;
@@ -2215,11 +2215,11 @@ static int ft2232_init_ftd2xx(uint16_t vid, uint16_t
pid, int more, int* try_mor
if (more)
{
- LOG_WARNING("unable to open ftdi device (trying more):
%lu", status);
+ LOG_WARNING("unable to open ftdi device (trying more):
%lu", (unsigned long)status);
*try_more = 1;
return ERROR_JTAG_INIT_FAILED;
}
- LOG_ERROR("unable to open ftdi device: %lu", status);
+ LOG_ERROR("unable to open ftdi device: %lu", (unsigned
long)status);
status = FT_ListDevices(&num_devices, NULL,
FT_LIST_NUMBER_ONLY);
if (status == FT_OK)
{
@@ -2235,7 +2235,7 @@ static int ft2232_init_ftd2xx(uint16_t vid, uint16_t pid,
int more, int* try_mor
if (status == FT_OK)
{
- LOG_ERROR("ListDevices: %lu", num_devices);
+ LOG_ERROR("ListDevices: %lu", (unsigned
long)num_devices);
for (i = 0; i < num_devices; i++)
LOG_ERROR("%" PRIu32 ": \"%s\"", i,
desc_array[i]);
}
@@ -2254,13 +2254,13 @@ static int ft2232_init_ftd2xx(uint16_t vid, uint16_t
pid, int more, int* try_mor
if ((status = FT_SetLatencyTimer(ftdih, ft2232_latency)) != FT_OK)
{
- LOG_ERROR("unable to set latency timer: %lu", status);
+ LOG_ERROR("unable to set latency timer: %lu", (unsigned
long)status);
return ERROR_JTAG_INIT_FAILED;
}
if ((status = FT_GetLatencyTimer(ftdih, &latency_timer)) != FT_OK)
{
- LOG_WARNING("unable to get latency timer: %lu", status);
+ LOG_WARNING("unable to get latency timer: %lu", (unsigned
long)status);
}
else
{
@@ -2269,19 +2269,19 @@ static int ft2232_init_ftd2xx(uint16_t vid, uint16_t
pid, int more, int* try_mor
if ((status = FT_SetTimeouts(ftdih, 5000, 5000)) != FT_OK)
{
- LOG_ERROR("unable to set timeouts: %lu", status);
+ LOG_ERROR("unable to set timeouts: %lu", (unsigned long)status);
return ERROR_JTAG_INIT_FAILED;
}
if ((status = FT_SetBitMode(ftdih, 0x0b, 2)) != FT_OK)
{
- LOG_ERROR("unable to enable bit i/o mode: %lu", status);
+ LOG_ERROR("unable to enable bit i/o mode: %lu", (unsigned
long)status);
return ERROR_JTAG_INIT_FAILED;
}
if ((status = FT_GetDeviceInfo(ftdih, &ftdi_device, &deviceID,
SerialNumber, Description, NULL)) != FT_OK)
{
- LOG_ERROR("unable to get FT_GetDeviceInfo: %lu", status);
+ LOG_ERROR("unable to get FT_GetDeviceInfo: %lu", (unsigned
long)status);
return ERROR_JTAG_INIT_FAILED;
}
else
@@ -2291,8 +2291,8 @@ static int ft2232_init_ftd2xx(uint16_t vid, uint16_t pid,
int more, int* try_mor
unsigned no_of_known_types = ARRAY_SIZE(type_str) - 1;
unsigned type_index = ((unsigned)ftdi_device <=
no_of_known_types)
? ftdi_device : FT_DEVICE_UNKNOWN;
- LOG_INFO("device: %lu \"%s\"", ftdi_device,
type_str[type_index]);
- LOG_INFO("deviceID: %lu", deviceID);
+ LOG_INFO("device: %lu \"%s\"", (unsigned long)ftdi_device,
type_str[type_index]);
+ LOG_INFO("deviceID: %lu", (unsigned long)deviceID);
LOG_INFO("SerialNumber: %s", SerialNumber);
LOG_INFO("Description: %s", Description);
}
@@ -2306,7 +2306,7 @@ static int ft2232_purge_ftd2xx(void)
if ((status = FT_Purge(ftdih, FT_PURGE_RX | FT_PURGE_TX)) != FT_OK)
{
- LOG_ERROR("error purging ftd2xx device: %lu", status);
+ LOG_ERROR("error purging ftd2xx device: %lu", (unsigned
long)status);
return ERROR_JTAG_INIT_FAILED;
}
@@ -3627,7 +3627,7 @@ static int signalyzer_h_led_set(unsigned char channel,
unsigned char led,
if ((status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
((uint32_t)(channel << 8) | led))) != FT_OK)
{
- LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status);
+ LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", (unsigned
long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -3635,7 +3635,7 @@ static int signalyzer_h_led_set(unsigned char channel,
unsigned char led,
(SIGNALYZER_DATA_BUFFER_ADDR + 1),
((uint32_t)(on_time << 8) | off_time))) != FT_OK)
{
- LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status);
+ LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", (unsigned
long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -3643,14 +3643,14 @@ static int signalyzer_h_led_set(unsigned char channel,
unsigned char led,
(SIGNALYZER_DATA_BUFFER_ADDR + 2),
((uint32_t)cycles))) != FT_OK)
{
- LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status);
+ LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", (unsigned
long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
if ((status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR,
SIGNALYZER_COMMAND_LED_SET)) != FT_OK)
{
- LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status);
+ LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", (unsigned
long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -3739,7 +3739,7 @@ static int signalyzer_h_init(void)
if ((status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR,
SIGNALYZER_COMMAND_VERSION)) != FT_OK)
{
- LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status);
+ LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", (unsigned
long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -3750,7 +3750,7 @@ static int signalyzer_h_init(void)
&read_buf[i])) != FT_OK)
{
LOG_ERROR("signalyzer_h_ctrl_read returned: %lu",
- status);
+ (unsigned long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
}
@@ -3763,21 +3763,21 @@ static int signalyzer_h_init(void)
if ((status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
(uint32_t)(signalyzer_h_side << 8))) != FT_OK)
{
- LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status);
+ LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", (unsigned
long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
if ((status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR + 1,
0x0404)) != FT_OK)
{
- LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status);
+ LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", (unsigned
long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
if ((status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR,
SIGNALYZER_COMMAND_GPIO_STATE)) != FT_OK)
{
- LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status);
+ LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", (unsigned
long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -3785,28 +3785,28 @@ static int signalyzer_h_init(void)
if ((status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
((uint32_t)(signalyzer_h_side << 8) | 0x01))) != FT_OK)
{
- LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status);
+ LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", (unsigned
long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
if ((status = signalyzer_h_ctrl_write(
(SIGNALYZER_DATA_BUFFER_ADDR + 1), 0xA000)) != FT_OK)
{
- LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status);
+ LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", (unsigned
long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
if ((status = signalyzer_h_ctrl_write(
(SIGNALYZER_DATA_BUFFER_ADDR + 2), 0x0008)) != FT_OK)
{
- LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status);
+ LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", (unsigned
long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
if ((status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR,
SIGNALYZER_COMMAND_I2C)) != FT_OK)
{
- LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status);
+ LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", (unsigned
long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -3815,7 +3815,7 @@ static int signalyzer_h_init(void)
if ((status = signalyzer_h_ctrl_read(SIGNALYZER_COMMAND_ADDR,
&read_buf[0])) != FT_OK)
{
- LOG_ERROR("signalyzer_h_ctrl_read returned: %lu", status);
+ LOG_ERROR("signalyzer_h_ctrl_read returned: %lu", (unsigned
long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -3830,7 +3830,7 @@ static int signalyzer_h_init(void)
&read_buf[i])) != FT_OK)
{
LOG_ERROR("signalyzer_h_ctrl_read returned:
%lu",
- status);
+ (unsigned long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
}
@@ -3895,7 +3895,7 @@ static int signalyzer_h_init(void)
!= FT_OK)
{
LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
- status);
+ (unsigned long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -3903,7 +3903,7 @@ static int signalyzer_h_init(void)
SIGNALYZER_COMMAND_POWERCONTROL_SET)) != FT_OK)
{
LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
- status);
+ (unsigned long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -3913,7 +3913,7 @@ static int signalyzer_h_init(void)
(uint32_t)(signalyzer_h_side << 8))) != FT_OK)
{
LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
- status);
+ (unsigned long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -3922,7 +3922,7 @@ static int signalyzer_h_init(void)
!= FT_OK)
{
LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
- status);
+ (unsigned long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -3930,7 +3930,7 @@ static int signalyzer_h_init(void)
SIGNALYZER_COMMAND_GPIO_MODE)) != FT_OK)
{
LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
- status);
+ (unsigned long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -3940,7 +3940,7 @@ static int signalyzer_h_init(void)
(uint32_t)(signalyzer_h_side << 8))) != FT_OK)
{
LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
- status);
+ (unsigned long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -3949,7 +3949,7 @@ static int signalyzer_h_init(void)
!= FT_OK)
{
LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
- status);
+ (unsigned long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -3958,7 +3958,7 @@ static int signalyzer_h_init(void)
SIGNALYZER_COMMAND_GPIO_STATE)) != FT_OK)
{
LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
- status);
+ (unsigned long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
#endif
@@ -4030,7 +4030,7 @@ static int signalyzer_h_init(void)
!= FT_OK)
{
LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
- status);
+ (unsigned long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -4039,7 +4039,7 @@ static int signalyzer_h_init(void)
SIGNALYZER_COMMAND_POWERCONTROL_SET)) != FT_OK)
{
LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
- status);
+ (unsigned long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -4051,7 +4051,7 @@ static int signalyzer_h_init(void)
(uint32_t)(signalyzer_h_side << 8))) != FT_OK)
{
LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
- status);
+ (unsigned long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -4060,7 +4060,7 @@ static int signalyzer_h_init(void)
!= FT_OK)
{
LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
- status);
+ (unsigned long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -4069,7 +4069,7 @@ static int signalyzer_h_init(void)
SIGNALYZER_COMMAND_GPIO_MODE)) != FT_OK)
{
LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
- status);
+ (unsigned long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -4081,7 +4081,7 @@ static int signalyzer_h_init(void)
(uint32_t)(signalyzer_h_side << 8))) != FT_OK)
{
LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
- status);
+ (unsigned long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -4090,7 +4090,7 @@ static int signalyzer_h_init(void)
!= FT_OK)
{
LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
- status);
+ (unsigned long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -4099,7 +4099,7 @@ static int signalyzer_h_init(void)
SIGNALYZER_COMMAND_GPIO_STATE)) != FT_OK)
{
LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
- status);
+ (unsigned long)status);
return ERROR_JTAG_DEVICE_ERROR;
}
#endif
--
1.7.5.1
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
