On 11/05/11 06:53, Rogan Dawes wrote:
Hi,
Yes, I tried downgrading the firmware (installed older versions of the
JLink software until I found the version it came with). No change in
behaviour, unfortunately.
Regards,
Rogan
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
Hello Rogan,
Did you correctly downgrade the firmware of the JLink ? I asked because
I faced the exact same issue a couple of weeks ago. I don't remember the
exact steps, but here's what I did :
1- Download version 4.10i of the firmware (
http://www.segger.com/cms/admin/uploads/userfiles/file/J-Link/Setup_JLinkARM_V410i.zip
).
2- Run 'exec invalidateFw' in Segger's command line tool.
3- Reconnect the JLink using the 4.10i version of the software and the
firmware should be updated automatically.
Kind regards,
Sébastien.
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
