On 04/26/2011 12:17 PM, Paolo Pisati wrote:
> Any idea?
>
bad wiring on my side:
Open On-Chip Debugger 0.5.0-dev-00858-g3c6af51 (2011-04-26-12:13)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
RCLK - adaptive
Using dbgbase = 0x80000000
force hard breakpoints
trst_only separate trst_push_pull
Info : RCLK (adaptive clock speed) not supported - fallback to 6000 kHz
Info : JTAG tap: omap4430.jrc tap/device found: 0x3b95c02f (mfg: 0x017,
part: 0xb95c, ver: 0x3)
Info : JTAG tap: omap4430.dap enabled
Polling target failed, GDB will be halted. Polling again in 100ms
Polling target failed, GDB will be halted. Polling again in 300ms
Info : JTAG tap: omap4430.m30_dap enabled
Polling target failed, GDB will be halted. Polling again in 700ms
Info : JTAG tap: omap4430.m31_dap enabled
Info : omap4430.cpu: hardware has 6 breakpoints, 4 watchpoints
Info : omap4430.m30: hardware has 6 breakpoints, 4 watchpoints
Info : omap4430.m31: hardware has 6 breakpoints, 4 watchpoints
Polling succeeded again
sorry for the noise.
--
bye,
p.
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
