On Sun, Apr 10, 2011 at 8:47 PM, Xiaofan Chen <xiaof...@gmail.com> wrote:
> On Sun, Apr 10, 2011 at 7:24 PM, Damjan Marion <damjan.mar...@gmail.com>
> wrote:
> I do not have an STM32 target with me. But I just tried to use
> J-Link V3 and V7 under Windows 7 32bit and it works with
> the Olimex LPC-P2148 target (using libusb-win32 filter
> driver and the original Segger driver).
Just tried this under Ubuntu 10.10 32bit. Using J-Link
V3 and V7 with both the Olimix LPC-P2148 and
TI/Luminary EK-LM321968 board and they are all okay.
mcuee@Ubuntu1010:~/Desktop/build/openocd/lm3s1968$ ./usejlink.sh
Open On-Chip Debugger 0.5.0-dev-00844-gd6027ca (2011-04-10-21:00)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
Warn : Adapter driver 'jlink' did not declare which transports it
allows; assuming legacy JTAG-only
Info : only one transport option; autoselect 'jtag'
500 kHz
Info : J-Link initialization started / target CPU reset initiated
Info : J-Link ARM V7 compiled Jun 30 2009 11:05:27
Info : J-Link caps 0xb9ff7bbf
Info : J-Link hw version 70000
Info : J-Link hw type J-Link
Info : J-Link max mem block 9152
Info : J-Link configuration
Info : USB-Address: 0xff
Info : Kickstart power on JTAG-pin 19: 0xffffffff
Info : Vref = 3.196 TCK = 1 TDI = 0 TDO = 1 TMS = 0 SRST = 0 TRST = 0
Info : J-Link JTAG Interface ready
Info : clock speed 500 kHz
Info : JTAG tap: lm3s1968.cpu tap/device found: 0x3ba00477 (mfg:
0x23b, part: 0xba00, ver: 0x3)
Info : lm3s1968.cpu: hardware has 6 breakpoints, 4 watchpoints
> I've seen this before but I thought the issue has been solved
> long before.
>
> What is the Linux distro you are using (assuming that you
> are using Linux). Are you using libusb-0.1 or libusb-1.0 plus
> libusb-compat-0.1? Debian/Ubuntu seem to use libusb-0.1
> and some other distros use libusb-1.0 plus libusb-compat-0.1.
>
--
Xiaofan
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
