On Tue, Mar 29, 2011 at 9:34 PM, Drasko DRASKOVIC <[email protected]> wrote: > I obderved this erroor : > Error: couldn't read enough bytes from FT2232 device (0 < 5) > recently, and only on my 14Kc MIPS based FPGA. > > Prevoisly I used ARM SoC, and it worked fine. So, this error is not > easily reproducible, and I doubt that you will see it.
I see. But I have read similar errors in the libftdi/openocd mailing list. It seems to me libftdi-1.0 can help to solve this issue. > I wanted to test new D2XX, v. 1.0.4, to see if it will remove these > errors, and it did. Old D2XX, v.0.4.16 has the same error (as does > libftdi). > > So I will now try to take a small look at libftdi, to se if there is > something suspicious. > You should take a look at libftdi-1.0 which is based on libusb-1.0. -- Xiaofan _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
