It's fast for 27kBytes/s for flash + erase. STM32F200 has 16M internal RC, so the JTAG can run at 2.5M. As I test for STM32F100, flash programming is usually at 13KBytes/s under OpenOCD.
ST website is not available in China, I don't know the state of STM32F200. I have placed an sample order of 20 STM32F205 1M/64Pin, and they only give the price, but not sure about when I can get it. The PCB will be sent to factory next week. 2011/2/3 Øyvind Harboe <oyvind.har...@zylin.com> > On Wed, Feb 2, 2011 at 7:53 PM, simon qian <simonqian.open...@gmail.com> > wrote: > > I have one STM32F207, but PCB will be available at end of this month. > > I'll go to ST this month for some STM32F205s if available. > > I can do the test if I can get the samples, but only for SWD, because > there > > is only SWD available in my PCB. > > That's great! > > In my first tests I'm seeing 27kBytes/s for flash + erase. 128kBytes > sectors takes > as much as 1000ms to erase(per the datasheet). > > I was able to clean up the branch, but I want to let it cool off > before I merge it. > > -- > Øyvind Harboe > > Can Zylin Consulting help on your project? > > US toll free 1-866-980-3434 / International +47 51 87 40 27 > > http://www.zylin.com/zy1000.html > ARM7 ARM9 ARM11 XScale Cortex > JTAG debugger and flash programmer > -- Best Regards, SimonQian http://www.SimonQian.com
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
