>> oyv...@titan:~/workspace/openocd$ openocd -c "interface ZY1000; >> zy1000_server 127.0.0.1;jtag_khz 50" -f board/am3517evm.cfg >> Open On-Chip Debugger 0.5.0-dev-00682-g0136977 (2010-12-30-08:23) >> Licensed under GNU GPL v2 >> For bug reports, read >> http://openocd.berlios.de/doc/doxygen/bugs.html >> Warn : Adapter driver 'ZY1000' did not declare which transports it >> allows; assuming legacy JTAG-only >> Info : only one transport option; autoselect 'jtag' >> 50 kHz >> 10 kHz >> trst_only separate trst_push_pull >> jtag_speed 6000 => JTAG clk=10 kHz >> Info : clock speed 10 kHz >> Info : JTAG tap: am35x.jrc tap/device found: 0x0b7ae02f (mfg: 0x017, >> part: 0xb7ae, ver: 0x0) >> Info : JTAG tap: am35x.dap enabled >> Info : am35x.cpu: hardware has 6 breakpoints, 2 watchpoints >> Error: JTAG-DP STICKY ERROR >> Error: MEM_AP_CSW 0x2800042, MEM_AP_TAR 0x54011140 >> Error: JTAG-DP STICKY ERROR >> Error: MEM_AP_CSW 0x2800042, MEM_AP_TAR 0x54011140 >> Error: JTAG-DP STICKY ERROR >> Error: MEM_AP_CSW 0x2800042, MEM_AP_TAR 0x54011140 >> Error: JTAG-DP STICKY ERROR > > These errors here, right ... need to investigate. Any pointers possibly ?
Sorry no. Fire up the debugger on OpenOCD and see what turns up? Try an older version of OpenOCD to see if it is a regression? -- Øyvind Harboe Can Zylin Consulting help on your project? US toll free 1-866-980-3434 / International +47 51 87 40 27 http://www.zylin.com/zy1000.html ARM7 ARM9 ARM11 XScale Cortex JTAG debugger and flash programmer _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
