Merged.
Thanks!
Took it for a spin on AM3517 and that target is no longer
incorrectly identified as an imx51.
That target still needs work though:
oyv...@titan:~/workspace/openocd$ openocd -c "interface ZY1000;
zy1000_server 127.0.0.1;jtag_khz 50" -f board/am3517evm.cfg
Open On-Chip Debugger 0.5.0-dev-00682-g0136977 (2010-12-30-08:23)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
Warn : Adapter driver 'ZY1000' did not declare which transports it
allows; assuming legacy JTAG-only
Info : only one transport option; autoselect 'jtag'
50 kHz
10 kHz
trst_only separate trst_push_pull
jtag_speed 6000 => JTAG clk=10 kHz
Info : clock speed 10 kHz
Info : JTAG tap: am35x.jrc tap/device found: 0x0b7ae02f (mfg: 0x017,
part: 0xb7ae, ver: 0x0)
Info : JTAG tap: am35x.dap enabled
Info : am35x.cpu: hardware has 6 breakpoints, 2 watchpoints
Error: JTAG-DP STICKY ERROR
Error: MEM_AP_CSW 0x2800042, MEM_AP_TAR 0x54011140
Error: JTAG-DP STICKY ERROR
Error: MEM_AP_CSW 0x2800042, MEM_AP_TAR 0x54011140
Error: JTAG-DP STICKY ERROR
Error: MEM_AP_CSW 0x2800042, MEM_AP_TAR 0x54011140
Error: JTAG-DP STICKY ERROR
--
Øyvind Harboe
Can Zylin Consulting help on your project?
US toll free 1-866-980-3434 / International +47 51 87 40 27
http://www.zylin.com/zy1000.html
ARM7 ARM9 ARM11 XScale Cortex
JTAG debugger and flash programmer
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
