Hello,
i have tried the latest git version and some fundamental commands are not working with lm3s: > reset halt JTAG tap: lm3s3748.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3) lm3s3748.cpu -- clearing lockup after double fault ... many many times the same line ... lm3s3748.cpu -- clearing lockup after double fault Info : Halt timed out, wake up GDB. lm3s3748.cpu -- clearing lockup after double fault ... many times the same ... lm3s3748.cpu -- clearing lockup after double fault timed out while waiting for target halted TARGET: lm3s3748.cpu - Not halted Command handler execution failed in procedure 'reset' lm3s3748.cpu -- clearing lockup after double fault ... output the same line again and again and again ..... Now i restart openocd: # Open On-Chip Debugger 0.5.0-dev-00568-g70b1538-dirty (2010-11-30-17:04) # Licensed under GNU GPL v2 # For bug reports, read # http://openocd.berlios.de/doc/doxygen/bugs.html # Info : only one transport option; autoselect 'jtag' # 6000 kHz # adapter_nsrst_delay: 100 # jtag_ntrst_delay: 100 # srst_only separate srst_gates_jtag srst_open_drain # Warn : use 'lm3s3748.cpu' as target identifier, not '0' # upload # Info : clock speed 6000 kHz # Info : JTAG tap: lm3s3748.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3) # Info : lm3s3748.cpu: hardware has 6 breakpoints, 4 watchpoints # Warn : lm3s3748.cpu -- clearing lockup after double fault No more output now but i get the same results with the reset command. Regards, Mathias _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
