Hi, We have hacked (connected jtag pins on the processor manually to create a jtag port on the board) an stm32 primer2 that uses an stm32f103vet6 processor. When we try to start the server, we are getting the following the error.
Error: 59 625 jtag.c:1351 jtag_examine_chain(): JTAG communication failure, check connection, JTAG interface, target power etc. Error: 60 625 jtag.c:1556 jtag_init_inner(): trying to validate configured JTAG chain anyway... Error: 64 657 jtag.c:1444 jtag_validate_chain(): Error validating JTAG scan chain, IR mismatch, scan returned 0x0000 Error: 85 828 jtag.c:1565 jtag_init_inner(): Could not validate JTAG chain, exit My feeling is that the hack did not work, any other reason why this may be happening. Thanks Nived
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
