Hi,
the new Marvell PXA270M processor has a new TAPID: 0x89265013.
Attached you will find a patch for target/pxa270.cfg that will handle this.
I have also attached a board/colibri.cfg file to support the Colibri
PXA270 module by Toradex.
Hope you can use it!
Best regards,
Áron Takács
Good, but I do not like board/colibri.cfg filename -> a bit too generic
as it is specific to a carrier board supporting the madule ...
Instead, it should be called board/toradex-colibri-carrier-pxa270 and /
or board/toradex-colibri-module-pxa270 . Also, does the srst_push_pull
will be OK for all the colibri carrier boards and module boards.
my 2c !
Regards,
Laurent
http://www.amontec.com
JTAGkey-2 : Amontec USB JTAG cable generic solution.
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
