Hi all, I'm new to zylin and eclipse and openocd
I have installed last version of plugin with my eclipse
I use Openocd and GDB
I have configured a debug configuration with zylin.
I use this configuration file for gdb
target remote localhost:3333
monitor reset
monitor sleep 500
monitor poll
#turn off timers and peripherals while we are stopped
mon mww 0xe0042004 0x1fff00
#mask interupts when we stop, re-enable when we turn back on.
define hook-continue
mon cortex_m3 maskisr off
end
define hook-stop
mon cortex_m3 maskisr on
end
define hookpost-stop
mon cortex_m3 maskisr off
end
define hook-step
mon cortex_m3 maskisr on
end
define hookpost-step
mon cortex_m3 maskisr off
end
define hook-stepi
mon cortex_m3 maskisr on
end
define hookpost-stepi
mon cortex_m3 maskisr off
end
define hook-next
mon cortex_m3 maskisr on
end
define hookpost-next
mon cortex_m3 maskisr off
end
define hook-nexti
mon cortex_m3 maskisr on
end
define hookpost-nexti
mon cortex_m3 maskisr off
end
symbol-file eclipse/compile/s2009.axf
file eclipse/compile/s2009.axf
#b main
b Boot_Handler
monitor sleep 500
monitor soft_reset_halt
the debug run correctly but when I resume the software with eclipse F8
key the interrupt aren't enabled because the "resume" operation of
eclipse isn't the "continue" command on gdb.....
someone can help me?
best regards
--
Michele Da Rold
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
