Hello,
I have just downloaded and compiled devel version of OpenOCD from Git
repo (Open On-Chip Debugger 0.5.0-dev-00494-g5c98e06) and when I try to
run OpenOCD with script files provided in tcl/target/, I have following
error :
(I comment jtag_ntrst_delay because it is also an invalid command)
openocd -d0 -f /opt/cross/source/openocd/tcl/target/stm32.cfg -f
/opt/cross/stm32/projects/jlink-segger.cfg -c init -c "jtag_khz 1000" -c
"reset_config trst_and_srst" -c "halt" -c "gdb_port 3333" -c
"telnet_port 4444"
Open On-Chip Debugger 0.5.0-dev-00494-g5c98e06 (2010-08-31-13:16)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
debug_level: 0
srst_only srst_pulls_trst srst_gates_jtag srst_open_drain
Runtime error, file
"/opt/cross/source/openocd/tcl/target/at91sam7sx.cfg", line 22:
invalid command name "jtag"
called at file "embedded:startup.tcl", line 57
in procedure 'script'
make: *** [debug0] Error 1
I also try with : at91sam7sx.cfg, same error
Here is my compilation options :
./configure --prefix=/usr --libdir=/usr/lib --sysconfdir=/etc
--localstatedir=/var --mandir=/usr/man --docdir=/usr/doc/openocd-5dev
--build=x86-slackware-linux --disable-doxygen-html
--enable-maintainer-mode --enable-jlink
Can anyone tell me what is wrong ?
Thank you.
Gaëtan
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
