Hi, >From a user of Versaloon:
> For the LPC1343, I used your lpc1700.cfg with memory region sizes updated. > I have been able to connect to the target with gdb, to load a program to > the RAM, step it, set breakpoints, continue, ctrl-C. It seems to me, that > basically, the system works. > However, often I get some errors, which prevent further work. But, I tried > an old binary of gdb (6.1.1, 2004), so I expect it may be caused by lack > of thumb2 support in the debugger. I think it's caused by ARMV7_GDB_HACKS. I tell him remove the hacks and try again. I'll report to the list when more feedbacks come. You can tell me if you have other suggestions. > I also got a strange error "clearing lockup after double fault" from > target/cortex_m3.c. I will prepare recent gdb and then I will tell you more. I'll check it soon, but it seems the fault will also occur even using JTAG. -- Best Regards, SimonQian http://www.SimonQian.com
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
