Great!! I have tried to add AVR32 support. Versaloon once can emulate JTAGICE mkII from Atmel, and can support AVR32 both under IAR EWAVR32 and AVR32 Studio. But I have removed these supports due to potential license problem -- I have no license to use JTAGICE mkII protocol.
I'll buy a AVR32 demo board and test it soon. 2010/8/16 Øyvind Harboe <oyvind.har...@zylin.com> > On Sun, Aug 15, 2010 at 9:53 PM, Oleksandr Tymoshenko > <go...@bluezbox.com> wrote: > > > > On 2010-08-15, at 10:49 AM, Øyvind Harboe wrote: > > > >> Looks like a good start to me. > >> > >> Any objections to committing at this point so it can serve > >> as a starting point for collaboration? > > No objections, quite contrary :) > >> > >> Some comments: > >> > >> - I believe error propagation is missing in some places > > Yes, I'll fix those places. > > > >> > >> - should there not be a timeout for some of the operations? > > Yes, busy loops should have timeouts in order to prevent them > > from spinning forever. It's on my TODO list. > > OK. I've pushed your first patch + a config file from David Brownell. > > I'll await patches on avr32 as work proceeds then! > > We find that we get a lot more testing of stuff in the master branch > and as this is a new target, there are *very* slight chances of > regression on other targets so it's much less work and hazzle just > to make it part of the master branch at this point. > > -- > Øyvind Harboe > US toll free 1-866-980-3434 / International +47 51 63 25 00 > http://www.zylin.com/zy1000.html > ARM7 ARM9 ARM11 XScale Cortex > JTAG debugger and flash programmer > _______________________________________________ > Openocd-development mailing list > Openocd-development@lists.berlios.de > https://lists.berlios.de/mailman/listinfo/openocd-development > -- Best Regards, SimonQian http://www.SimonQian.com
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
