>> ocd_mem2array/ocd_array2mem don't want work on my system, they throw >> an error: >> Error: mem2array: no command context
ØH> Fixed in the master branch.
I've installed master branch and mem2array works fine, thanks!
Now I'm trying to write a TCL-function which would write flash from
image:
I want to read image from TCL script.
I wrote
set fh [ open file_name r ]
but caught this error:
invalid command name "open"
openocd has stripped TCL, so I must use 'Image loading commands'
I RTFMed a bit and found the function:
load_image filename address min_address length
I though to use it in cycle (expanded):
# first block
load_image filename $flash_addr 0 512
# downloaded 500 bytes in 0.545993s (0.894 KiB/s)
write_block_command 0
# second block
load_image filename [ expr $flash_addr - 512 ] 512 1024
# downloaded 0 bytes in 0.000067s (0.000 KiB/s)
write_block_command 1
# third block
load_image filename [ expr $flash_addr - 512 ] 1024 1536
# downloaded 0 bytes in 0.000058s (0.000 KiB/s)
write_block_command 2
... etc
But this function doesn't return any information. How can I understand
that I must finish writting operation?
It is a closed disk: If I want write flash from script I must have a
driver which was hard-integrated into openocd.
My hardware is allow me to write memory cells/read/run/stop/etc. But I
can't program its flash. I'm sad :(
The 'manual' driver would be an ideal solution :)
--
... mpd is off
. ''`. Dmitry E. Oboukhov
: :’ : email: un...@debian.org jabber://un...@uvw.ru
`. `~’ GPGKey: 1024D / F8E26537 2006-11-21
`- 1B23 D4F8 8EC0 D902 0555 E438 AB8C 00CF F8E2 6537
signature.asc
Description: Digital signature
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
