Anyone else get this message? Is it coincidence that I understand it? Gary Carlson <gcarl...@carlson-minot.com> wrote:
I am just curious if the small problem that I discovered this afternoon can be duplicated by any other developers/users using other jlink dongles (or even non-jlink dongles). The first time through a "reset halt" seems to fail, but subsequently operates flawlessly thereafter. If anyone has some interest, this is the process: 1. Shutdown openocd (if already running). 2. Start openocd using the appropriate config file for your board. 3. Open telnet session and type the commands listed in blue: Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Open On-Chip Debugger > halt > poll background polling: on TAP: at91sam9g20.cpu (enabled) target state: halted target halted in ARM state due to breakpoint, current mode: Supervisor cpsr: 0x000000d3 pc: 0x00000000 MMU: disabled, D-Cache: disabled, I-Cache: disabled > reset halt JTAG tap: at91sam9g20.cpu tap/device found: 0x0792603f (mfg: 0x01f, part: 0x7926, ver: 0x0) timed out while waiting for target halted TARGET: at91sam9g20.cpu - Not halted Command handler execution failed in procedure 'reset' called at file "command.c", line 650 called at file "command.c", line 361 > reset halt JTAG tap: at91sam9g20.cpu tap/device found: 0x0792603f (mfg: 0x01f, part: 0x7926, ver: 0x0) target state: halted target halted in ARM state due to breakpoint, current mode: Supervisor cpsr: 0x000000d3 pc: 0x00000000 MMU: disabled, D-Cache: disabled, I-Cache: disabled NOTE! DCC downloads have not been enabled, defaulting to slow memory writes. Type 'help dcc'. NOTE! Severe performance degradation without fast memory access enabled. Type 'help fast'. Gary _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
