The JTAGkey-tiny dongle and board work OK, I have now successfully used
the ColibriLoader software to download images to the board.
~kaius
Kaius Häggblom wrote:
The attached trace was produced by starting program:
./src/openocd -s tcl -f board/colibri_pxa320.cfg -f nterface/jtagkey.cfg
-d 3 -l openocd.lo
... and issuing following commands through telnet client:
> reg
> reset halt
> reg cpsr 0xd3
> reset halt
Exactly as in original post with this issue on PXA270, writing and
reading regs work OK, but anything else fails.
~kaius
yvind Harboe wrote:
I would strongly encourage someone who's familiar with these patches
to repost them to this list so we can work on getting the changes merged.
Should be in that projects and OpenOCD's interest...
------------------------------------------------------------------------
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
