OK it is the solution for you -> customizing target.cfg regarding the
capability of the JTAG Dongle !
BUT it is not a generic solution . The target.cfg should not be in
relation ship with a dedicated interface.cfg ;-(
THE solution is to add new argument on the jtag newtap.
Regards,
Laurent
http://www.amontec.com
iñigo arrazola wrote:
Thanks. We tried to add it but it wasn't recognized as a command.
Taking a look at the link you provided in your first response, we
figured out how to limit the frequency to 15000 kHz (the maximum it
can run at) using the command "jtag_khz 15000" in the target.cfg,
before executing the jtag newtap.
Regards,
2010/4/15 Laurent Gauch <laurent.ga...@amontec.com
<mailto:laurent.ga...@amontec.com>>
sorry, "adapter_khz" instead "adapter_speed"
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
<mailto:Openocd-development@lists.berlios.de>
https://lists.berlios.de/mailman/listinfo/openocd-development
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
