Hello world! I had to reschedule my tasks/priorities and it looks I am totally overworked until end of June, so I will not be able to work on SWD as I wanted, sorry :-( :-( :-( However I am still able to perform part-time support towards STM32 and SWD. Currently I have captured data transfers between RIDE7 and RLink on STM32Primer2 in most popular operations, so it could give an input on how to program this device (no debug at this moment). I guess that RLink might be intelligent enough not to disturb user with low-level operations such as JTAG and SWD, so programming with SWD might look similar than it is done with JTAG (only my guess!). Please take a look at the dumps - I have also attached an installation software viewer for *.ufo file format (windows only sorry). With the RLink pinout and the transfer dumps it should be possible to implement at least flash programming onboard the STM32Primer2. If desired I can also perform similar low-level hardware dumps done with STM32Primer1 for full protocol comparision (if still anything is unknown for Primer1).
Here are the files: http://files.tomek.cedro.info/electronics/arm/cortex-m3/stm32/ Best regards, Tomek -- CeDeROM, SQ7MHZ, http://www.tomek.cedro.info _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
