Hello,
i just tried to get the Altera USB-Blaster running... but everytime I
get the same errors, when i am trying to run the application.
I tried it with the latest ftd2xx drivers and openocd 0.4.0 (using
later versions makes no difference, i get the same errors)
using TAP declarations in the config file makes no difference.
Does anyone have a hint for me, to get the usb blaster running with openocd?
Greetings
Stefan
--------------------------------------------------------------------
$ src/openocd.exe -f tcl/interface/altera-usb-blaster.cfg
Open On-Chip Debugger 0.4.0 (2010-03-10-11:28)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
3000 kHz
Warn : no usb_blaster device description specified, using default
'USB-Blaster'
Error: Translation from khz to jtag_speed not implemented
Error: Translation from khz to jtag_speed not implemented
Error: Translation from jtag_speed to khz not implemented
Error: Translation from khz to jtag_speed not implemented
Info : interface specific clock speed value 2278080
Warn : There are no enabled taps. AUTO PROBING MIGHT NOT WORK!!
Error: JTAG scan chain interrogation failed: all zeroes
Error: Check JTAG interface, timings, target power, etc.
Warn : There are no enabled taps. AUTO PROBING MIGHT NOT WORK!!
Error: JTAG scan chain interrogation failed: all zeroes
Error: Check JTAG interface, timings, target power, etc.
Command handler execution failed
Warn : jtag initialization failed; try 'jtag init' again.
Warn : gdb services need one or more targets defined
--------------------------------------------------------------------
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
