I don't see any attachments, so I can't evaluate how it differs from the previous script I submitted (and use). The one currently in the repository needs a few updates (such as removing the halt, and using reset-start and reset-end, and using arm7_9 fast downloads).

I've attached my current version.


Øyvind Harboe wrote:
Attached is an LPC3250 target script that has been tested on:

http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-ARM9-LPC3250.html



There is an LPC3250 script in OpenOCD already, but I'm figuring the attached
one is "superior".

Any comments?


I'm not sure why reset-start calls halt.


source [find target/lpc3250.cfg]

jtag_nsrst_delay 200
jtag_ntrst_delay 1
jtag_khz 200
reset_config trst_and_srst separate

arm7_9 dcc_downloads enable

$_TARGETNAME configure -event gdb-attach { reset init }

$_TARGETNAME configure -event reset-start {
             arm7_9 fast_memory_access disable
             jtag_khz 200
}

$_TARGETNAME configure -event reset-end {
             jtag_khz 6000
             arm7_9 fast_memory_access enable
}

$_TARGETNAME configure -event reset-init { phytec_lpc3250_init }

# Bare-bones initialization of core clocks and SDRAM
proc phytec_lpc3250_init { } {
        # Set clock dividers 
        #   ARMCLK = 266.5 MHz
        #   HCLK   = 133.25 MHz
        #   PERIPHCLK = 13.325 MHz
        mww 0x400040BC 0
        mww 0x40004050 0x140        
        mww 0x40004040 0x4D
        mww 0x40004058 0x16250

        # Init PLLs
        mww 0x40004044 0x006
        sleep 1 busy
        mww 0x40004044 0x106
        sleep 1 busy
        mww 0x40004044 0x006        
        sleep 1 busy
        mww 0x40004048 0x2

        # Init SDRAM with 133 MHz timings
        mww 0x40028134 0x00FFFFFF
        mww 0x4002802C 0x00000008

        mww 0x31080000 1
        mww 0x31080008 0
        mww 0x40004068 0x1C000
        mww 0x31080028 0x11
        
        mww 0x31080400 0
        mww 0x31080440 0
        mww 0x31080460 0
        mww 0x31080480 0

        # Delays
        mww 0x31080030 1
        mww 0x31080034 6
        mww 0x31080038 10
        mww 0x31080044 1
        mww 0x31080048 9
        mww 0x3108004C 12
        mww 0x31080050 10
        mww 0x31080054 1
        mww 0x31080058 1
        mww 0x3108005C 0
        
        mww 0x31080100 0x5680
        mww 0x31080104 0x302

        # Init sequence
        mww 0x31080020 0x193
        sleep 1 busy
        mww 0x31080024 1
        mww 0x31080020 0x113
        sleep 1 busy
        mww 0x31080020 0x013
        sleep 1 busy
        mww 0x31080024 65
        mww 0x31080020 0x093
        mdw 0x80020000
        mww 0x31080020 0x013

        # SYS_CTRL remapping
        mww 0x40004014 1
}
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development

Reply via email to