I have ordered a XC9572XL board. It will be sent to me after Chinese New Year holiday. I'll mail you when there is a result.
2010/2/16 simon qian <simonqian.open...@gmail.com> > According to the log file, the svf parser should be running OK. > The command below can run success with the right TDO value: > SDR 32 TDI (00000000) SMASK (FFFFFFFF) TDO (F9604093) MASK > (0FFFFFFF) > > But one command after that will fail, not fail to do JTAG, but fail to > receive the right TDO value from the target. > To check the reason why it fails, you will have to log the waveform on the > JTAG pins. > > BTW: You can try a slower speed first. > 2010/2/15 Vaclav Peroutka <vacla...@seznam.cz> > > Hello Simon, >> >> attached is log1.log and the SVF file itself. >> >> Thank you for help, hop[efully you find what is going wrong. >> >> > ---------------------------------------- >> > Try adding '-d3' option, and post the log info. >> > >> > > Hello all, >> > > >> > > I compiled git HEAD revision of openocd today and try to program >> XC9572 >> > > with SVF generated by Xilinx ISE 10.1. I use following openocd.cfg: >> > > telnet_port 4444 >> > > gdb_port 3333 >> > > interface ft2232 >> > > ft2232_device_desc "Dual Device A" >> > > ft2232_layout usbjtag >> > > ft2232_vid_pid 0x0403 0x6001 >> > > jtag_khz 500 >> > > jtag newtap xc9572 tap -irlen 8 -expected-id 0x59604093 >> > > >> > > I run openocd and then telnet to the port 4444. Then I use "svf >> > > project.svf" and result is below. Does anybody know, what is going >> wrong ? >> > > XC9572 is already programmed. I did it with xc3sprog. But it can not >> erase >> > > the CPLD, thus I am looking for some another method how to program it. >> > > >> > > Thank you in advance, >> > > Vaclav >> > > >> > > > > -- > Best Regards, SimonQian > http://www.SimonQian.com <http://www.simonqian.com/> > -- Best Regards, SimonQian http://www.SimonQian.com
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
