On Tuesday 26 January 2010, Ethan Eade wrote: > > >> This fixes the same problem on our iMX35 (Cogent CSB732). > >> GDB breakpoints didn't work properly in the previous versions and do > >> work now. > >> > > > > Thanks for the confirmation! > > > > When you say "in the previous versions" ... roughly which versions? > > > Breakpoints were working on the iMX35 in 0.3.1 and were not working with > the latest version as of Friday afternoon PST. Your commit on Friday > evening was the difference. > > Sorry that I can't give you a better start of the interval,
Nah, that much was OK. You confirmed that what you saw as a regression is now gone. Details of how it regressed aren't very relevant right now. > but the only > reason we pulled the newer version of OpenOCD after 0.3.1 was to support > the Signalyzer H2. That caused board reset to stop working for a while, > and then it started working again with a revision sometime in the last > couple weeks, but breakpoints were not working. Now they are also working. > > So we have avoided pulling new versions until absolutely necessary, as > things tend to break. Such are the joys of an active project! Yep! On the other hand, the newer versions generally make at least some things work better. And the point of the RC phase -- which we're now in! -- is to make sure we identify and fix such accidental regressions. So thanks for helping us make sure we nailed that one! - Dave _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
