On Thu, Jan 14, 2010 at 2:39 PM, Spencer Oliver <s...@spen-soft.co.uk> wrote: > Laurentiu Cocanu wrote: >> I tested version v0.4.0-rc1-98-g6c75f52 of OpenOCD for STR912 target. >> >> I tried to erase all the contents of the flash, sectors 0 to 7. Commands: >> >> reset init >> flash erase_address 0 0x80000 (or flash erase_sector 0 0 7) >> >> The expected result is: >> >> erased sectors 0 through 7 on flash bank 0 in x.xx0000s >> >> but instead the command returned erase timed out: >> >> erase timed out >> failed erasing sectors 0 to 7 (-4) >> > > Probably worth changing, this is how i originally wrote the driver anyway :) > > it may even be a arm966e_write_cp15 bug. > The str9 has a bug that effects the fmi status reg if the TCM bit is not > set. > > This would normally be done by str9x flash_config, may need checking it > still works. > > http://www.st.com/stonline/products/literature/es/12944.pdf
So do we apply the patch or not? -- Øyvind Harboe US toll free 1-866-980-3434 / International +47 51 63 25 00 http://www.zylin.com/zy1000.html ARM7 ARM9 ARM11 XScale Cortex JTAG debugger and flash programmer _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
