Well, I tried the "workaround" with the following results:
> mwb 0x90000555 0x90;mdb 0x90000000 0x50 0x90000000: 00 20 88 ce 00 01 fb ff 00 42 ff ff ff ff ff ff ff ff ff ff ff ff ff So writing 0x90 at offset 0x555 from the start of flash address gives the correct results: 0x20 = ST (manufacturer) 0x88CE = Device code Is this a bug that can be corrected or is the problem in my configuration file? _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
