Hi, While at it, the OpenOCD configure.in should use pgk-config or libftdi-config to find out the current LIBFTDI libs and CFLAGS, especially the include path.
Regards, Albert. David Brownell a écrit : > Reason for OpenOCD folk to care is that "previously failed..." > below. > > Y'all are encouraged to test... > > ---------- Forwarded Message ---------- > > Subject: Re: Patches applied > Date: Friday 04 December 2009 > From: Thomas Jarosch <thomas.jaro...@intra2net.com> > To: libf...@developer.intra2net.com > > Hello Jim, > > On Thursday, 3. December 2009 01:37:19 Jim Paris wrote: >> I finally got a chance to try this patch: "Determine maximum packet >> size via usb config descriptor". It works fine on: >> FT2232D, full speed >> FT2232H, high speed >> FT2232H, full speed (previously failed without the patch) >> >> I wrote a small program to help with the testing, which might be >> suitable as an example. Patch attached. > > Thanks for testing and for the serial input example code! Applied. > > My current plan is to prepare a new libftdi release next week, > so if there are any outstanding patches, send them now :) > > Cheers, > Thomas > > -- > libftdi - see http://www.intra2net.com/en/developer/libftdi for details. > To unsubscribe send a mail to libftdi+unsubscr...@developer.intra2net.com > > > ------------------------------------------------------- > _______________________________________________ > Openocd-development mailing list > Openocd-development@lists.berlios.de > https://lists.berlios.de/mailman/listinfo/openocd-development _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
