I use LM3S6432 SoC that is controlled via LM3S881 board. When writing to flash I frequently get such error message:
> halt target state: halted target halted due to debug-request, current mode: Thread xPSR: 0x81000000 pc: 0x0000bdf6 msp: 0x20007380 > flash write_image erase image.bin 0x1000 bin auto erase enabled Algorithm flash write 2048 words to 0x1000, 18299 remaining error executing stellaris flash write algorithm flash writing failed with CRIS: 0x0 error writing to flash at address 0x00000000 at offset 0x00001000 (-902) called at file "command.c", line 473 called at file "embedded:startup.tcl", line 89 called at file "embedded:startup.tcl", line 91 called at file "embedded:startup.tcl", line 93 Sometimes it working at once, but sometime when I get this error I rerun the command and then everything is working properly. Any idea? Regards, Yegor _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
