I'm trying to get u-boot running on a smdk2410-based board. I'm using openocd and jtag and am trying to load u-boot into ram as follows:
load_image u-boot.bin 0x33f80000 Which *seems* to work: 103668 bytes written at address 0x33f80000 downloaded 103668 byte in 0.500045s I then try to run it by using resume 0x33f80000 but it doesn't seem that u-boot is executing. What am I doing wrong? My openocd config looks like this: source [find interface/jtagkey.cfg] source [find target/samsung_s3c2410.cfg] nand device s3c2410 s3c2410.cpu
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
