Hi, Im using Amontec JTAGkey2 with FT2232H with LPC2364. The Openocd often reports me this error: Error: couldn't read the requested number of bytes from FT2232 device (76 < 81) Error: couldn't read from FT2232
Im using libftdi. Usually I get this error consecutively for random times. But after couple restarts it start working. I also get this error Error: EmbeddedICE v7 handling might be broken and this memory write caused data abort (address: 0x00001a3c, size: 0x4, count: 0x1) (with random address) Jiri Kubias -- =================================================== Bc. Jiri Kubias Czech Technical University in Prague Faculty of Electrical Engineering dept. of Control Engineering Karlovo namesti 13/E, 121 35 Prague Czech Republic web page: http://dce.felk.cvut.cz e-mail: jiri.kub...@gmail.com mobile: 777 974167 ===================================================
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
