Hi, I just changed my Cortex-M3 from LS3S6965 to ML3S6611 and it stopped working :(
When I start openocd (0.2, Linux, FTD2232) I get: Open On-Chip Debugger 0.2.0 (2009-07-15-14:00) Release [...] 500 kHz jtag_nsrst_delay: 100 jtag_ntrst_delay: 100 Info : device: 4 Info : deviceID: 67354056 Info : SerialNumber: TLRYVQOW A Info : Description: Turtelizer JTAG/RS232 Adapter A Info : JTAG tap: lm3s6965.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3) Info : JTAG Tap/device matched => I checked and the device code is exactly the same for both chips! Using telnet, if I display memory I get: > mdw 0 8 0x00000000: 20000010 00000021 0000000d 00000029 00000045 00000045 00000045 00000000 > mdw 20000000 8 AHBAP Cached values: dp_select 0x0, ap_csw 0xa2000012, ap_tar 0xffffffff SWJ-DP STICKY ERROR Read MEM_AP_CSW 0x23000052, MEM_AP_TAR 0x1312d04 AHBAP Cached values: dp_select 0x0, ap_csw 0xa2000012, ap_tar 0xffffffff SWJ-DP STICKY ERROR Read MEM_AP_CSW 0x23000052, MEM_AP_TAR 0x1312d04 Block read error address 0x1312d00, count 0x8 Runtime error, file "command.c", line 469: Thanks for any help, Alain _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
