The Stellaris eval boards don't have TRST signals, so defining ntrst_delay is pointless; don't.
At least the LM3S3748 eval board doesn't need nsrst_delay either; remove that too. --- tcl/board/ek-lm3s1968.cfg | 1 - tcl/board/ek-lm3s3748.cfg | 3 --- tcl/board/ek-lm3s811.cfg | 1 - tcl/board/ek-lm3s9b9x.cfg | 1 - 4 files changed, 6 deletions(-) --- a/tcl/board/ek-lm3s1968.cfg +++ b/tcl/board/ek-lm3s1968.cfg @@ -17,7 +17,6 @@ source [find target/lm3s1968.cfg] jtag_khz 3000 jtag_nsrst_delay 100 -jtag_ntrst_delay 100 #LM3S1968 Evaluation Board has only srst reset_config srst_only --- a/tcl/board/ek-lm3s3748.cfg +++ b/tcl/board/ek-lm3s3748.cfg @@ -9,9 +9,6 @@ source [find target/lm3s3748.cfg] # LM3S parts don't support RTCK jtag_khz 500 -jtag_nsrst_delay 100 -jtag_ntrst_delay 100 - # Board has only srst reset_config srst_only --- a/tcl/board/ek-lm3s811.cfg +++ b/tcl/board/ek-lm3s811.cfg @@ -13,7 +13,6 @@ source [find target/lm3s811.cfg] jtag_khz 500 jtag_nsrst_delay 100 -jtag_ntrst_delay 100 #LM3S811 Evaluation Board has only srst reset_config srst_only --- a/tcl/board/ek-lm3s9b9x.cfg +++ b/tcl/board/ek-lm3s9b9x.cfg @@ -12,7 +12,6 @@ source [find target/lm3s9b9x.cfg] jtag_khz 500 jtag_nsrst_delay 100 -jtag_ntrst_delay 100 #LM3S9B9x Evaluation Board has only srst reset_config srst_only
The Stellaris eval boards don't have TRST signals, so defining ntrst_delay is pointless; don't. At least the LM3S3748 eval board doesn't need nsrst_delay either; remove that too. --- tcl/board/ek-lm3s1968.cfg | 1 - tcl/board/ek-lm3s3748.cfg | 3 --- tcl/board/ek-lm3s811.cfg | 1 - tcl/board/ek-lm3s9b9x.cfg | 1 - 4 files changed, 6 deletions(-) --- a/tcl/board/ek-lm3s1968.cfg +++ b/tcl/board/ek-lm3s1968.cfg @@ -17,7 +17,6 @@ source [find target/lm3s1968.cfg] jtag_khz 3000 jtag_nsrst_delay 100 -jtag_ntrst_delay 100 #LM3S1968 Evaluation Board has only srst reset_config srst_only --- a/tcl/board/ek-lm3s3748.cfg +++ b/tcl/board/ek-lm3s3748.cfg @@ -9,9 +9,6 @@ source [find target/lm3s3748.cfg] # LM3S parts don't support RTCK jtag_khz 500 -jtag_nsrst_delay 100 -jtag_ntrst_delay 100 - # Board has only srst reset_config srst_only --- a/tcl/board/ek-lm3s811.cfg +++ b/tcl/board/ek-lm3s811.cfg @@ -13,7 +13,6 @@ source [find target/lm3s811.cfg] jtag_khz 500 jtag_nsrst_delay 100 -jtag_ntrst_delay 100 #LM3S811 Evaluation Board has only srst reset_config srst_only --- a/tcl/board/ek-lm3s9b9x.cfg +++ b/tcl/board/ek-lm3s9b9x.cfg @@ -12,7 +12,6 @@ source [find target/lm3s9b9x.cfg] jtag_khz 500 jtag_nsrst_delay 100 -jtag_ntrst_delay 100 #LM3S9B9x Evaluation Board has only srst reset_config srst_only
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
