Hi Rene, I have done some time measurements. These are my boot times:
After Powerup: Bootrom starts after 0 seconds AT91 boot starts after 0 seconds u-boot starts after 1 second linux starts after 7 seconds linux is ready after 14 seconds network is up and ubifs is ready after 19 seconds All times are measured from powerup. When reseting with openocd, it takes 2 seconds before bootrom starts. In this time my system receives 2 resets. I don't know why. When executing a reset init, it take 3 seconds before my reset-init-script starts. My reset-init-script requires 2 seconds to execute. I only setup my clock and initialise sd-ram. Cheers, Ferdinand R.Doss schreef: > Hallo Ferdinand, > > How long does it need to boot at your board? > > > I have one u-boot it needs 25s for the first output. But then I reset > with the reset button it starts directly. > On this configuration I can connect openocd very good. > > > On the other u-boot it starts direcly after power up and also directly > after soft reset. > > The differnce is in the vector table vector 6 look into > doc6221.pdf(datascheet for AT92SAM9260) Section 13.4.2 > > > I will try It later to build up the board. > > > > Rene Doss > _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
