On Fri, Aug 7, 2009 at 9:13 AM, Xiaofan Chen<xiaof...@gmail.com> wrote: > On Fri, Jul 31, 2009 at 9:33 PM, Xiaofan Chen<xiaof...@gmail.com> wrote: >> On Fri, Jul 31, 2009 at 7:56 PM, Xiaofan Chen<xiaof...@gmail.com> wrote: >>> Not really. It seems that some Ubuntu 9.04 updates yesterday messed up with >>> OpenOCD now. Actually it crashed now with ftdi interface. >>> >> >> The same result for Arch Linux with the latest svn version V2571. >> Again release version V0.2.0 works fine with the on-board ftdi interface. >> > > It still segfaults with latest svn version V2574, tested under Fedora 10. > > [mc...@localhost lm3s1968]$ openocd -f ek-lm3s1968.cfg > Open On-Chip Debugger 0.3.0-in-development (2009-08-07-08:48) svn:2574 > $URL: svn://svn.berlios.de/openocd/trunk/src/openocd.c $ > For bug reports, read http://svn.berlios.de/svnroot/repos/openocd/trunk/BUGS > 3000 kHz > jtag_nsrst_delay: 100 > jtag_ntrst_delay: 100 > Info : JTAG tap: lm3s1968.cpu tap/device found: 0x3ba00477 (mfg: > 0x23b, part: 0xba00, ver: 0x3) > Info : JTAG Tap/device matched > Info : accepting 'telnet' connection from 0 > target state: halted > target halted due to debug-request, current mode: Thread > xPSR: 0x01000000 pc: 0x0001dfdc msp: 0x20000200 > flash 'stellaris' found at 0x00000000 > auto erase enabled > Info : Algorithm flash write 1710 words to 0x0, 1710 remaining > Segmentation fault >
By the way, the flashing itself seems to work as after reset, the program runs fine. -- Xiaofan http://mcuee.blogspot.com _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
