Xiaofan Chen wrote: > On Fri, Jun 19, 2009 at 10:21 PM, Gene Smith<g...@chartertn.net> wrote: >>> Run inf-wizard.exe from libusb-win32-device-bin-0.1.12.1 directory. >> I see it in the bin dir. >> >>> Click "Next" >>> Click the correct VID/PID: "0x058B 0x002B USB Composite Device" >>> Click "Next" >>> Save the inf file as "ftdi_libusb.inf" in the same directory. >> The bin dir? (Or does it matter?) > > Yes. That matters. > >> Right, but when I try to "update" the driver, I find the "olimex.inf" >> that is saved but it always tells me "the specifed location does not >> contain information about your hardware". > > Hmm, that should not happen. Could you post the Olimex inf > file content? What is the VID/PID combination? > >> This seems to work find somehow when I installed the jlink. Now the >> olimex is being difficult. Any idea what I am missing here? (You can >> have jlink and ftdi/olimex drivers both installed, right?) >> > > Have you tried the following method? > > Run cmd.exe as admin (under Vista) and > D:\libusb-win32-device-bin-0.1.12.1\bin>c:\windows\sys tem32\rundll32 > libusb0.dll,usb_install_driver_np_rundll olimex.inf >
I didn't see this at first on your previous email down at the bottom. But this works! It is now seeing the device. So you don't need the "driver installations wizards" to install the driver? Thanks! _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
