Hi Rick,
I saw the openocd.udev file. Unfortunately, OpenSUSE doesn't have a
group named "plugdev". I created the following using some existing rules
as an example, but it doesn't help:
BUS=="usb", SYSFS{idVendor}=="0403", SYSFS{idProduct}=="cff8",
MODE="664", RUN="/etc/udev/setmode"
These are my /sys and /dev usb nodes:
cea05:~ # ls -l /sys/bus/usb/devices/
total 0
lrwxrwxrwx 1 root root 0 2009-06-09 14:55 1-0:1.0 ->
../../../devices/pci0000:00/0000:00:02.0/usb1/1-0:1.0
lrwxrwxrwx 1 root root 0 2009-06-09 14:55 1-1 ->
../../../devices/pci0000:00/0000:00:02.0/usb1/1-1
lrwxrwxrwx 1 root root 0 2009-06-09 14:55 1-1:1.0 ->
../../../devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0
lrwxrwxrwx 1 root root 0 2009-06-09 14:55 1-3 ->
../../../devices/pci0000:00/0000:00:02.0/usb1/1-3
lrwxrwxrwx 1 root root 0 2009-06-09 14:55 1-3:1.0 ->
../../../devices/pci0000:00/0000:00:02.0/usb1/1-3/1-3:1.0
lrwxrwxrwx 1 root root 0 2009-06-09 14:55 1-3:1.1 ->
../../../devices/pci0000:00/0000:00:02.0/usb1/1-3/1-3:1.1
lrwxrwxrwx 1 root root 0 2009-06-09 14:55 2-0:1.0 ->
../../../devices/pci0000:00/0000:00:02.2/usb2/2-0:1.0
lrwxrwxrwx 1 root root 0 2009-06-09 14:55 2-3 ->
../../../devices/pci0000:00/0000:00:02.2/usb2/2-3
lrwxrwxrwx 1 root root 0 2009-06-09 14:55 2-3:1.0 ->
../../../devices/pci0000:00/0000:00:02.2/usb2/2-3/2-3:1.0
lrwxrwxrwx 1 root root 0 2009-06-09 14:55 3-0:1.0 ->
../../../devices/pci0000:00/0000:00:02.1/usb3/3-0:1.0
lrwxrwxrwx 1 root root 0 2009-06-09 14:55 3-2 ->
../../../devices/pci0000:00/0000:00:02.1/usb3/3-2
lrwxrwxrwx 1 root root 0 2009-06-09 14:55 3-2:1.0 ->
../../../devices/pci0000:00/0000:00:02.1/usb3/3-2/3-2:1.0
lrwxrwxrwx 1 root root 0 2009-06-09 14:55 usb1 ->
../../../devices/pci0000:00/0000:00:02.0/usb1
lrwxrwxrwx 1 root root 0 2009-06-09 14:55 usb2 ->
../../../devices/pci0000:00/0000:00:02.2/usb2
lrwxrwxrwx 1 root root 0 2009-06-09 14:55 usb3 ->
../../../devices/pci0000:00/0000:00:02.1/usb3
cea05:~ # ls -l /dev/usb*
crw-rw---- 1 root root 253, 0 2009-06-08 02:08 /dev/usbdev1.1_ep00
crw-rw---- 1 root root 253, 1 2009-06-08 02:08 /dev/usbdev1.1_ep81
crw-rw---- 1 root root 253, 9 2009-06-08 02:08 /dev/usbdev1.2_ep00
crw-rw---- 1 root root 253, 10 2009-06-08 02:08 /dev/usbdev1.2_ep81
crw-rw-r-- 1 root root 253, 13 2009-06-09 14:54 /dev/usbdev1.5_ep00
crw-rw-r-- 1 root root 253, 15 2009-06-09 14:54 /dev/usbdev1.5_ep02
crw-rw-r-- 1 root root 253, 17 2009-06-09 14:54 /dev/usbdev1.5_ep04
crw-rw-r-- 1 root root 253, 14 2009-06-09 14:54 /dev/usbdev1.5_ep81
crw-rw-r-- 1 root root 253, 16 2009-06-09 14:54 /dev/usbdev1.5_ep83
crw-rw---- 1 root root 253, 2 2009-06-08 02:08 /dev/usbdev2.1_ep00
crw-rw---- 1 root root 253, 3 2009-06-08 02:08 /dev/usbdev2.1_ep81
crw-rw---- 1 root root 253, 6 2009-06-08 02:08 /dev/usbdev2.3_ep00
crw-rw---- 1 root root 253, 7 2009-06-08 02:08 /dev/usbdev2.3_ep01
crw-rw---- 1 root root 253, 8 2009-06-08 02:08 /dev/usbdev2.3_ep82
crw-rw---- 1 root root 253, 4 2009-06-08 02:08 /dev/usbdev3.1_ep00
crw-rw---- 1 root root 253, 5 2009-06-08 02:08 /dev/usbdev3.1_ep81
crw-rw---- 1 root root 253, 11 2009-06-08 02:08 /dev/usbdev3.2_ep00
crw-rw---- 1 root root 253, 12 2009-06-08 02:08 /dev/usbdev3.2_ep81
/sys/bus/usb/devices/1-3 is the Amontec, based on the pid/vid, but I
don't see a corresponding device.
Thanks,
Paul
Rick Altherr wrote:
> There is a udev rule file in the contrib folder. It's been a while
> since I've messed with Linux device nodes, but I believe the device will
> show up in /sys but udev needs to create the /dev node.
> --
> Rick Altherr
> kc8...@kc8apf.net
>
> "He said he hadn't had a byte in three days. I had a short, so I split
> it with him."
> -- Unsigned
>
>
>
> On Jun 9, 2009, at 2:32 PM, Paul J THACKER wrote:
>
>> Hi,
>>
>> Openocd-0.1.0 on OpenSUSE 11.0 with Amontec jtagkey-tiny:
>>
>> thack...@cea05:~/cartesio/eclipse/trunk> openocd -f jtagkey-tiny.cfg
>> Open On-Chip Debugger 0.1.0 (2009-05-21-09:56) Release
>>
>>
>> BUGS? Read http://svn.berlios.de/svnroot/repos/openocd/trunk/BUGS
>>
>>
>> $URL:
>> https://kc8...@svn.berlios.de/svnroot/repos/openocd/tags/openocd-0.1.0/src/openocd.c
>>
>>
>> $
>> Error: unable to open ftdi device: 18
>> initialise_usb failed
>> Error: ListDevices: NONE
>>
>> Runtime error, file "command.c", line 456:
>>
>> Trace and debug outputs:
>>
>> open("jtagkey-tiny.cfg", O_RDONLY) = 3
>> close(3) = 0
>> open("jtagkey-tiny.cfg", O_RDONLY) = 3
>> fstat64(3, {st_mode=S_IFREG|0644, st_size=118, ...}) = 0
>> mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
>> 0) = 0xb8092000
>> read(3, "#interface\ninterface ft2232\nft22"..., 4096) = 118
>> read(3, "", 4096) = 0
>> read(3, "", 4096) = 0
>> close(3) = 0
>> munmap(0xb8092000, 4096) = 0
>> gettimeofday({1244582536, 328068}, NULL) = 0
>> gettimeofday({1244582536, 328114}, NULL) = 0
>> gettimeofday({1244582536, 329023}, NULL) = 0
>> gettimeofday({1244582536, 329079}, NULL) = 0
>> gettimeofday({1244582536, 329212}, NULL) = 0
>> gettimeofday({1244582536, 329255}, NULL) = 0
>> gettimeofday({1244582536, 329362}, NULL) = 0
>> gettimeofday({1244582536, 329404}, NULL) = 0
>> gettimeofday({1244582536, 329534}, NULL) = 0
>> gettimeofday({1244582536, 329577}, NULL) = 0
>> open("/proc/sys/kernel/osrelease", O_RDONLY) = 3
>> fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
>> mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
>> 0) = 0xb8092000
>> read(3, "2.6.25.18-0.2-pae\n", 1024) = 18
>> read(3, "", 1024) = 0
>> close(3) = 0
>> munmap(0xb8092000, 4096) = 0
>> open("/proc/bus/usb",
>> O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|0x80000) = 3
>> fstat64(3, {st_mode=S_IFDIR|0555, st_size=0, ...}) = 0
>> fcntl64(3, F_GETFD) = 0x1 (flags FD_CLOEXEC)
>> getdents64(3, /* 2 entries */, 1024) = 48
>> getdents64(3, /* 0 entries */, 1024) = 0
>> close(3) = 0
>> open("/dev/usb", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|0x80000) =
>> -1 ENOENT (No such file or directory)
>> write(2, "Error: unable to open ftdi devic"..., 38Error: unable to open
>> ftdi device: 18
>> ) = 38
>> open("/proc/bus/usb",
>> O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|0x80000) = 3
>> fstat64(3, {st_mode=S_IFDIR|0555, st_size=0, ...}) = 0
>> getdents64(3, /* 2 entries */, 1024) = 48
>> getdents64(3, /* 0 entries */, 1024) = 0
>> close(3) = 0
>> open("/dev/usb", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|0x80000) =
>> -1 ENOENT (No such file or directory)
>> fstat64(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(136, 6), ...}) = 0
>> mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
>> 0) = 0xb8092000
>> write(1, "initialise_usb failed\n", 22initialise_usb failed
>> ) = 22
>> write(2, "Error: ListDevices: NONE\n\n", 26Error: ListDevices: NONE
>>
>> ) = 26
>> write(2, "Runtime error, file \"command.c\","..., 47Runtime error, file
>> "command.c", line 456:
>> ) = 47
>> exit_group(1)
>>
>> cea05:/home/thackerp/cartesio/eclipse/trunk # openocd -d 3 -f
>> jtagkey-tiny.cfg
>> Open On-Chip Debugger 0.1.0 (2009-05-21-09:56) Release
>>
>>
>> BUGS? Read http://svn.berlios.de/svnroot/repos/openocd/trunk/BUGS
>>
>>
>> $URL:
>> https://kc8...@svn.berlios.de/svnroot/repos/openocd/tags/openocd-0.1.0/src/openocd.c
>>
>>
>> $
>> User : 5 0 command.c:494 command_run_line():
>> Debug: 6 0 configuration.c:88 find_file(): found jtagkey-tiny.cfg
>> Debug: 8 0 command.c:91 script_command(): script_command - interface
>> Debug: 9 0 command.c:108 script_command(): script_command - interface,
>> argv[0]=ocd_interface
>> Debug: 10 0 command.c:108 script_command(): script_command - interface,
>> argv[1]=ft2232
>> Debug: 12 0 command.c:91 script_command(): script_command -
>> ft2232_device_desc
>> Debug: 13 0 command.c:108 script_command(): script_command -
>> ft2232_device_desc, argv[0]=ocd_ft2232_device_desc
>> Debug: 14 0 command.c:108 script_command(): script_command -
>> ft2232_device_desc, argv[1]=Amontec JTAGkey A
>> Debug: 16 0 command.c:91 script_command(): script_command - ft2232_layout
>> Debug: 17 0 command.c:108 script_command(): script_command -
>> ft2232_layout, argv[0]=ocd_ft2232_layout
>> Debug: 18 0 command.c:108 script_command(): script_command -
>> ft2232_layout, argv[1]=jtagkey
>> Debug: 20 0 command.c:91 script_command(): script_command -
>> ft2232_vid_pid
>> Debug: 21 0 command.c:108 script_command(): script_command -
>> ft2232_vid_pid, argv[0]=ocd_ft2232_vid_pid
>> Debug: 22 0 command.c:108 script_command(): script_command -
>> ft2232_vid_pid, argv[1]=0x0403
>> Debug: 23 0 command.c:108 script_command(): script_command -
>> ft2232_vid_pid, argv[2]=0xcff8
>> User : 24 0 command.c:494 command_run_line():
>> Debug: 26 0 command.c:91 script_command(): script_command - init
>> Debug: 27 0 command.c:108 script_command(): script_command - init,
>> argv[0]=ocd_init
>> Debug: 28 0 openocd.c:144 handle_init_command(): target init complete
>> Debug: 29 0 ft2232.c:1463 ft2232_init_ftd2xx(): 'ft2232' interface using
>> FTD2XX with 'jtagkey' layout (0403:cff8)
>> Error: 30 1 ft2232.c:1506 ft2232_init_ftd2xx(): unable to open ftdi
>> device: 18
>> initialise_usb failed
>> Error: 31 1 ft2232.c:1532 ft2232_init_ftd2xx(): ListDevices: NONE
>>
>> Debug: 32 1 command.c:427 run_command(): Command failed with error
>> code -100
>> User : 33 1 command.c:626 openocd_jim_vfprintf(): Runtime error, file
>> "command.c", line 456:
>> User : 34 1 command.c:626 openocd_jim_vfprintf():
>>
>> Same error when run as root. FTDI device shows up under lsusb:
>>
>> thack...@cea05:~/cartesio/eclipse/trunk> lsusb
>> Bus 003 Device 002: ID 046d:c315 Logitech, Inc. Classic New Touch
>> Keyboard
>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 002 Device 003: ID 0bc2:0502 Seagate RSS LLC
>> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>> Bus 001 Device 004: ID 0403:cff8 Future Technology Devices
>> International, Ltd
>> Bus 001 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
>> Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>
>> I have no /dev/usb. Do I need some kind of udev rule to create it?
>> Anybody see this before?
>>
>> Thanks,
>> Paul
>> _______________________________________________
>> Openocd-development mailing list
>> Openocd-development@lists.berlios.de
>> https://lists.berlios.de/mailman/listinfo/openocd-development
>
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
