On Wed, 2009-05-20 at 22:54 -0700, Rick Altherr wrote:
> On May 20, 2009, at 10:31 PM, Zach Welch wrote:
>
> > On Wed, 2009-05-20 at 22:23 -0700, Rick Altherr wrote:
> >> On Mar 25, 2009, at 2:54 PM, joern kaipf wrote:
> >>
> >>> * autodetection if FS or HS device attachted -> adapt tck max
> >>> * enable adaptive clocking if HS device attached and jtag_khz = 0 in
> >>> cfg (not
> >>> tested yet)
> >>>
> >>> Note:
> >>> The HS devices are currently only support by the drivers from FTDI
> >>> and not
> >>> from the libftdi. So using libftdi and RTCK support will cause a
> >>> error
> >>> message.
> >>> <ft2232.patch>_______________________________________________
> >>> Openocd-development mailing list
> >>> Openocd-development@lists.berlios.de
> >>> https://lists.berlios.de/mailman/listinfo/openocd-development
> >>
> >>
> >> This doesn't appear to have been applied, but doesn't apply cleanly
> >> to
> >> HEAD. Is there an updated version available?
> >
> > I cleaned it up and posted it here:
> >
> >
> > https://lists.berlios.de/pipermail/openocd-development/2009-April/005479.html
> >
> > It probably needs a little more work.
> >
> > Cheers,
> >
> > Zach
> >
> >
>
>
> It looks like even _that_ version doesn't apply cleanly since the last
> batch of updates to the ft2232 driver.
Bummer, but that is where I would start development. I recommend
applying it to the old revision ('svn up -r${PATCH_REV}') then letting
SVN help with the merge through an 'svn up'. You are probably more
familiar with the code and can figure out what to do better than I.
Cheers,
Zach
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
