More tests on flash writing. I got the script from psas. Maybe it is too
old (for V1257). I will try later with new scripts.
http://www.linuxjournal.com/article/10421
With black J-link
> script oocd_flash_lpc2148.script
J-Link command 0xdd failed (-2)
J-Link command 0xde failed (-2)
J-Link command 0xdc failed (-2)
J-Link command 0xde failed (-2)
J-Link command 0xdd failed (-2)
J-Link command 0xdf failed (-2)
usb_bulk_write failed (requested=6, result=-2)
jlink_tap_execute, wrong result -107 (expected 1)
usb_bulk_write failed (requested=6, result=-2)
jlink_tap_execute, wrong result -107 (expected 1)
Runtime error, file "embedded:startup.tcl", line 172:
error: -104
in procedure 'ocd_process_reset'
Runtime error, file "oocd_flash_lpc2148.script", line 10:
in procedure 'script' called at file "command.c", line 453
called at file "embedded:startup.tcl", line 122
With Yellow Jlink
> script oocd_flash_lpc2148.script
usb_bulk_read failed (requested=1, result=-110)
jlink_tap_execute, wrong result -107 (expected 1)
keep_alive() was not invoked in the 1000ms timelimit. GDB alive packet
not sent! (3245). Workaround: increase "set remotetimeout" in GDB
usb_bulk_read failed (requested=1, result=-110)
jlink_tap_execute, wrong result -107 (expected 1)
Runtime error, file "embedded:startup.tcl", line 172:
error: -104
in procedure 'ocd_process_reset'
Runtime error, file "oocd_flash_lpc2148.script", line 10:
in procedure 'script' called at file "command.c", line 453
called at file "embedded:startup.tcl", line 122
--
Xiaofan http://mcuee.blogspot.com
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
