Hello List, it is possible that I have make to much testing here and mixed something. I will start with a clean build.
>What I find curious about the lpc2294.cfg and your posting above >is that working memory is at 0x40000000. It is a olimex LPC-2294 board with external RAM. I will test it again with the 1606 and 1770. Regards, Michael -----Ursprüngliche Nachricht----- Von: oyvindhar...@gmail.com [mailto:oyvindhar...@gmail.com]im Auftrag von Øyvind Harboe Gesendet: Mittwoch, 13. Mai 2009 21:32 An: Michael Fischer Cc: Openocd-Dev Betreff: Re: [Openocd-development] r1770, load_image ist not working here Referring to our offlist discussion: 1606 has the same problem per your testing. What I find curious about the lpc2294.cfg and your posting above is that working memory is at 0x40000000. Does the lpc2294 have two ram regions? Could it be that the config script is busted and that working memory address is wrong? -- Øyvind Harboe Embedded software and hardware consulting services http://consulting.zylin.com _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
